Sony TV & Home A/V Connection Manual page 5

We recommend this hookup to view cable or satellite service and BDs or DVDs on your TV.
Your TV must have a composite video or an S-video input to connect the DVD player to your
TV.
(1) Coaxial cable
(1) Composite A/V cable
1. Connect the coaxial cable from the wall to the RF IN jack on the set-top box.
Note: If your satellite service does not include local channels, you may want to connect an
antenna to the TV IN jack on your satellite receiver. Refer to the operating instructions for specific
information on switching between satellite and local broadcasts.
2. Connect a coaxial cable to:
a. RF OUT jack on the set-top box
b. RF IN jack on the TV
3. Connect a composite A/V cable to:
a. LINE OUT jack on the DVD / BD player
b. VIDEO input jack on the TV
Notes:
Be sure to match the colors of the cable connectors with the colors of the jacks.
If your TV and DVD / BD player both have S-Video jacks, use this connection instead of
the yellow composite cable. The S-Video connection provides a higher quality video
image. Connect the red and white audio cables for the sound.
(1) Coaxial cable
(1) S-Video cable
(1) Composite audio cable
© 2010 Sony Electronics Inc. All rights reserved.
5