Sony TV & Home A/V Connection Manual page 17

Hide thumbs Also See for TV & Home A/V:

We recommend this hookup to view cable or satellite service and BDs or DVDs on your TV with

optimum video quality. This connection should be used if your TV, set-top box, and DVD / BD

player have HDMI jacks. If your TV has a DVI jack instead of an HDMI jack, you can use a

HDMI to DVI adapter and a composite audio cable.

(2) HDMI cables

1. Connect the coaxial cable from the wall to the RF IN jack on the set-top box.

Note: If your satellite service does not include local channels, you may want to connect an

antenna to the TV IN jack on your satellite receiver. Refer to the operating instructions for specific

information on switching between satellite and local broadcasts.

2. Connect an HDMI cable to:

a. HDMI OUT jack on the set-top box

b. HDMI IN jack on the TV

Important: If the TV has a DVI jack instead of an HDMI jack, skip step b above and follow the

steps below.

c. HDMI IN jack on the HDMI-to-DVI adapter.

d. Connect a DVI cable to:

i. DVI OUT jack on the HDMI-to-DVI adapter

ii. DVI IN jack on the TV

e. Connect a composite audio cable to:

i. AUDIO OUT jacks on the set-top box

ii. AUDIO IN jacks located next to or near the DVI jack on the TV

(2) HDMI cables

(2) Composite audio cables

(2) HDMI-to-DVI adapters