This is a general recommendation based on the information you provided. You can customize
the connections to suit your individual preferences and viewing habits.
Some hookup recommendations have two cable options listed in the cable section. You will only
need the cables listed under the cable option you choose. You can also use a combination of
cables rather than one type throughout.
This hookup guide uses generic
names for connection jacks and input
labels. The table on the right lists
some of the label variations you may
find on your equipment.
If you don't have a cable box or satellite receiver (AKA set-top box), skip the steps for the set-
top box. Connect the coaxial cable from the wall into the RF in connection on the next device. If
you're not connecting a broadcast signal source, disregard the steps involving the set-top box
and begin with the steps for the equipment you are connecting.
This guide provides basic instructions for operating your equipment. The steps can vary by
brand and model. Refer to the manual supplied with your equipment for details specific to your
model. Sony
product manuals and documentation
you have questions about a non-Sony device, please contact the manufacturer for information.
You can now surf the web with Sony Internet TV products. If you need help connecting to your
wired or wireless network, check out our
RF IN, RF OUT
LINE IN, LINE OUT
AUDIO IN, AUDIO
OUT
MONITOR
can found on the Sony eSupport web site. If
Network Connection
© 2010 Sony Electronics Inc. All rights reserved.
UHF/VHF, CABLE, LINE, TV
VIDEO
FIXED, VARIABLE
TO TV, VIDEO IN, VIDEO OUT
tutorial.
1