Table of Contents
Advertisement
Viewing the device list
74
Devices may automatically appear on the device list when the FortiAnalyzer
receives a connection attempt, according to your configuration of Unregistered
Device Options, but devices may also automatically appear as a result of
importing log files. For more information, see
To view the device list, go to Device > All.
Figure 1: Devices list
Add Device
Select to manually add a new device to the device list.
For instructions on manually adding devices, see
adding a device" on page
Show
Select the type of devices to display in the list. You can select
devices by type or by group, or select Unregistered to display
devices that are attempting to connect but that have not yet been
added.
Page
Enter a page number, then press Enter to display that page
number of the device list.
Unregistered Device
Select the options to instruct the FortiAnalyzer unit on how to
handle connection attempts from unregistered devices. For more
Options
information, see
attempt handling" on page
Name
The name of the device in the device list. This can be any
descriptive name that you want assign to it, and does not need to
be its host name.
Hardware
The model of the device. For example, the device list displays a
FortiGate-300A model as FGT300A.
IP Address
The IP address of the device. If the device has not recently
established a connection, 0.0.0.0 appears.
Administrative
The ADOM(s) to which the device is assigned.
Domains
This column does not appear on FortiAnalyzer-100/A/B models.
Log Tx Rx
Indicates connection permissions. Green check mark icons in:
Content Tx Rx
•
Tx indicates the device is allowed to transmit to the
Quar Tx Rx
FortiAnalyzer unit.
Report Tx Rx
•
Rx indicates the device is allowed to view or retrieve items
stored on the FortiAnalyzer unit.
Types of connections supported by each device type vary, and so
it is normal for some device types to have no permission in
Content (content archive), Quar (quarantine), and Report
columns, or to have Tx but not Rx permission in the Log column.
For example, Syslog devices are not capable of retrieving logs,
and so have no associated Rx permission in the Log column.
For FortiManager units, Tx and Rx indicators in the Log column
differ in meaning.
"Importing a log file" on page
80.
"Configuring unregistered device connection
79.
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908
Device
95.
Add
Edit
Delete
Block
"Manually
Advertisement
Table of Contents
