Table of Contents
Advertisement
Rolling and uploading Network Analyzer logs
156
Enable log uploading Select to upload log files to an server when a log file rolls.
Server type
Select the protocol to use when uploading to the server:
•
File Transfer Protocol (FTP)
•
Secure File Transfer Protocol (SFTP)
•
Secure Copy Protocol (SCP)
Server IP address
Enter the IP address of the log upload server.
Username
Enter the user name required to connect to the upload server. By
default, the user name is anonymous; select the field to enter a
different user name.
Password
Enter the password required to connect to the upload server.
Confirm Password
Re-enter the password to verify correct entry.
Directory
Enter a location on the upload server where the log file should be
saved.
Upload Files
Select when the FortiAnalyzer unit should upload files to the
server.
•
When rolled: Uploads logs whenever the log file is rolled,
based upon Log file should be rolled.
•
Daily at hh:mm: Uploads logs at the configured time,
regardless of when or what size it rolls at according to Log file
should be rolled.
Upload rolled files in
Select to compress the log files in gzipped format before
uploading to the server.
gzipped format
Delete files after
Select to remove the log file from the FortiAnalyzer hard disk once
the FortiAnalyzer unit completes the upload.
uploading
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908
Network Analyzer
Advertisement
Table of Contents
