Jumpers Setup - ASROCK EN2C602-4L/D12 User Manual

2.7 Jumpers Setup

The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is "Short". If no jumper cap
is placed on pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose
pin1 and pin2 are "Short" when jumper cap
is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.13, 16,19,21,24,27)
PSU Jumper
(9-pin PSU Jumper)
(see p.13, 16,19)
1-2:
Default
2-3:
ME recovery mode
1-2:
PSU_SMBus loads the data
via PCH chip
1 1 1
2-3:
PSU_SMBus loads the data
via BMC chip (Default)
53