Ford 2011 Flex Owner's Manual page 87

Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens
Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of
the lens
Take your vehicle to a dealer for service if any of the above conditions of
unacceptable moisture are present.
Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized "D.O.T." for North America and an
"E" for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
Front park/turn lamp
*Front sidemarker lamp
Headlamp
Tail/brake/turn signal lamp
Supplemental taillamp
Rear sidemarker
Backup lamp
License plate lamp
*High-mount brake lamp
2011 Flex (471)
Owners Guide, 1st Printing
USA (fus)
Number of bulbs
2
N/A
2
2
2
N/A
2
2
N/A
2
2
N/A
Lights
Trade
number
3157NA
LED
9008 H13
D3 HID
(optional)
3157K
*LED
(optional)
194
194
*LED
(optional)
921
C5WL
LED
87