Disengaging Speed Control; Resuming A Set Speed; Increasing Speed While Using Speed Control - Ford 2010 Fusion Hybrid Owner's Manual

Driver Controls

Disengaging speed control

To disengage the speed control:
• Tap the brake pedal or clutch pedal (if equipped)
Disengaging the speed control will not erase previous set speed.

Resuming a set speed

Press the RSM (resume) control and
release it. This will automatically
return the vehicle to the previously
set speed.

Increasing speed while using speed control

There are two ways to set a higher
speed:
• Press and hold the SET + control
until you get to the desired
speed, then release the control.
You can also use the SET +
control to operate the Tap-Up
function. Press and release this
control to increase the vehicle set
speed in small amounts by 1 mph
(1.6 km/h).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.
94
2010 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA (fus)