JP28 Keyboard/Mouse Wakeup Jumper
This motherboard provides keyboard / mouse wake-up function. You can use JP28
to enable or disable this function, which could resume your system from suspend
mode with keyboard or mouse. The factory default setting is "Disable" (1-2), and
you may enable this function by setting the jumper to 2-3.
IEEE 1394 Connectors
This motherboard comes with AGERE 1394 Control Chip onboard, the IEEE 1394
provides data transfer rate up to 400Mb/s, and USB 1.0/1.1just has 12Mbps.
Hence, the IEEE 1394 interface can connect with the devices that need high data
transferring performance, such as digital camera, scanner or others IEEE 1394
devices. Please use the proper cable to connect with devices.
Pin 1
Pin 1
1
1
Disable
Enable
(Default)
1
2
TPA-
TPA+
GND
GND
TPB+
TPB-
+12V (Fused)
+12V (Fused)
SHIED GND
9
10
Warning:
Please
be
noted that Hot-Plug in is not
allowed
on
IEEE
1394
header, because it will burn
the IC of the controller and
damage the motherboard.
USB 2.0 Connector
This motherboard provides eight USB 2.0 ports to connect USB devices, such as
mouse, keyboard, modem, printer, etc. There are four ports on the back panel.
You can use proper cables to connect the Front USB connector to USB modules or
front panel of chassis.
Pin 1
Pin 1
AOpen Bonus Pack CD
You can use the auto-run menu of Bonus CD disc. Choose the utility or driver,
select model name and complete installation.