Panel Dimmer Control; Vertical Aim Adjustment; Flash To Pass - Ford 2005 F-150 Owner's Manual

Ford truck owner's guide
Hide thumbs Also See for 2005 F-150:
Table of Contents

Advertisement

Lights

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parklamp operation.
Move the control to the full upright
position, past detent, to turn on the
interior lamps.
Move the control to the full down
position, past detent, to prevent the
interior lights from illuminating
when the doors are opened.

VERTICAL AIM ADJUSTMENT

1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.
• (1) 8 feet (2.4 meters)
• (2) Center height of lamp to
ground
• (3) 25 feet (7.6 meters)
• (4) Horizontal reference line
2. Measure the height from the
center of your headlamp (indicated
by a 3.0 mm circle on the lens) to
the ground and mark an 8 foot (2.4
meter) horizontal reference line on
the vertical wall or screen at this height (a piece of masking tape works
well).
44
2005 F-150 (f12)
Owners Guide (post-2002-fmt)
USA (fus)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents