Controls And Functions - Rear Panel - American DJ RGBW4C User Instructions

RGBW4C
The RGB FADE can be controlled using the following:
- The RED/SPEED FADER (13) will control the program speed.
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
9. SOUND ACTIVE MODE - Pressing this button will activate the sound
active mode, the sensitivity of the sound active mode can be adjusted
using knob located on the rear of the controller. Other adjustmenst can
be made using the following:
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
10. WHITE/WHITE DIMMER FADER - Use this fader to control the output
intensity of the white LEDs.
11. BLUE/MASTER DIMMER FADER - This fader has two functions.
- This fader can be used to control the blue LEDs intensity in MANUAL
RGBW MODE.
- In AUTO PROGRAM, CHASE MODE, RGB FADE, COLOR MACROS,
& SOUND ACTIVE MODE this fader will control the RGB LEDs output
intensity.
12. GREEN/FADE TIME FADER - This fader has two functions.
- This fader can be used to control the green LEDs intensity in
MANUAL RGBW MODE.
- In AUTO PROGRAM, CHASE MODE, RGB FADE, COLOR MACROS,
& SOUND ACTIVE MODE this fader will control the fade time.
13. RED/SPEED FADER - This fader has three functions.
- This fader can be used to control the red LEDs intensity in MANUAL
RGBW MODE.
- In AUTO PROGRAM, CHASE MODE & RGB FADE this fader will con-
trol program speed.
- In COLOR MACROS MODE this fader will create your color to remain
static.
14. COLORS/CHASES/PRESETS - Press the COLOR buttons to activate
desired COLOR MACROS, or when in CHASE MODE the color buttons
will activate chases. See the built-in chases on page 10.
American DJ® www.americandj.com - RGBW4C
Controls and Functions
Page 9
RGBW4C

Controls and Functions - Rear Panel

15 16 17
15. POWER SWITCH - Accepts a DC 9V~12V, 300mA minimum, power
supply.
16. DC INPUT - Accepts a DC 9V~12V, 300mA minimum, power supply.
17. DMX OUT - Used to send DMX signal to the compatable LED fixtures.
18. SOUND SENSITIVITY - Use this knob to adjust the sound sensitivity.
American DJ® www.americandj.com - RGBW4C
18
Page 10