Advertisement
Color Burst 8 DMX
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns, dim-
mer and strobe. A DMX controller allows you to create unique pro-
grams tailored to your individual needs.
1. The Color Burst 8 DMX is a 3 DMX channel unit. See pages 13-14
for a detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Master-Slave Operation:
units together and operate without a controller. In Master-Slave opera-
tion one unit will act as the controlling unit and the others will react to
the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. On the Master unit find your desired show or choose sound act-
tive mode and set that by pressiing the ENTER button.
3. On the slave units
tap the MENU button until "SLNd" is display-
ed, and Press ENTER.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
American DJ Supply
- www.americandj.com - Color Burst 8 DMX - Page 11
©
®
This function allows you to use a Elation
This function will allow you to link up to 16
Operation
Color Burst 8 DMX
Sound Active Mode:
®
linked together, to run to the beat of the music.
1. Tap the MENU button until
ENTER.
2.
Tap the UP or DOWN buttons until "ON" is displayed and press
ENTER, and then press and hold the MENU button to confirm.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Show Mode:
together, to run your desired factory show.
1. Tap the MENU button until
ENTER.
2.
Tap the UP or DOWN buttons until you find your desired show,
and press ENTER, and then press and hold the MENU button to
confirm.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Color Burst 8 DMX
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. the quantity that can be
connected is 24 fixtures maximum. After 24 fixtures you will need
to use a new power outlet. they must be the same fixtures. Do
Not mix fixtures.
Color Burst 8 DMX
Blackout
Function
Mode
American DJ Supply
©
This mode allows a single unit or several units
"SOUN" is displayed, and press
This mode allows a single unit or several units linked
"SHNd" is displayed, and press
Power Cord Daisy Chaining
Blackout the unit
1. Synchronous Strobe
Show Select
2. Two light Strobe
Show 1-12 or Fade
3. Sound Strobe
Sound/Strobe
Show
(LED OFF)
(LED ON)
- www.americandj.com - Color Burst 8 DMX - Page 12
®
Operation
UC3 Control
All LEDs On
Full on
(LED blinking)
Advertisement
