Advertisement
Color Burst 8 DMX
active mode off or on.
1. Tap the MENU button until "SHNd" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number between
0-12. A fade show can also be chosen. Shows 1-12 are preset shows,
while "Sh 0" is random show. Press the UP or DOWN buttons to find
your desired show.
3. Press ENTER, and then press and hold the MENU button for at least
3 seconds to confirm.
SOUN
- In this mode you can run the unit in sound active
mode
1. Tap the MENU button until "SOUN" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to confirm.
bLNd
- This will control blackout
1. Tap the MENU button until "bLNd" is displayed, press ENTER.
2. Either "YES" or "NO" will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button for at least
three seconds to confirm.
LEd
- With this function the LED display will turn off after 2
minutes.
1. Tap the MENU button until "LEd" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or DOWN
buttons to select "ON" to keep the LED display on at all times, or "OFF"
to allow the LED display to turn off after 2 minutes. Press any button to
turn on the LED display again.
American DJ Supply
- www.americandj.com - Color Burst 8 DMX - Page 9
©
®
System Menu
Color Burst 8 DMX
3. Press ENTER, and then press and hold the MENU button for at least
three seconds to confirm.
dISP
1. Tap the MENU button until "dISP" is displayed, press ENTER.
2. Either "dISP" or "dSIP" will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button for at least
three seconds to confirm.
TEST
1. Tap the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test.
FHrS
of the unit.
1. Tap the MENU button until "FHrS" is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
VEr
1. Tap the MENU button until "VEr" is displayed. Press the ENTER
button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
- This will "flip" the LED display
- With this function will run a self test program.
- With this function you can display the running time
- This will display the software version
American DJ Supply
- www.americandj.com - Color Burst 8 DMX - Page 10
©
®
System Menu
Advertisement
