American DJ Vizi Spot 5R User Instructions page 6

Vizi Spot 5R
1. Lens Assembly - This high quality lens can be focused in DMX
mode. Please see pages 44-51 for DMX values and functions.
2. Microphone - This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
3. Mode/Esc Button - This button is used to enter the main menu and
submenus. It is also used to exit.
4. Up Button - This button is used to scroll forwards when navigating
through the system menu.
5. Down Button - This button is used to scroll backwards when navi-
gating through the system menu.
6. Enter Button - This button is used to select and confirm a function
in the system menu.
7. Digital Display - This display shows the menu and operating func-
tions that you can choose from.
8. Carrying Handles - The includes built-in carrying handles. Be sure
to always handle the unit by the built-in handles. Never lift or carry-
ing the unit by head or yoke. Pulling on or transporting the unit by the
moving head may severely damage the unit and will void the unit war-
ranty.
9. Lamp Assembly and Access Plate - This plate accesses the lamp
socket assembly. The unit includes a spring mounted discharge lamp.
Be sure to only replace with same type lamp. After replacing a lamp
be sure the lamp is centered in the reflector. See pages 53-54 for
details on installing and optimizing replacement lamps. Never operate
this unit with the lamp exposed, this lamp emits strong UV radiation.
Please see page 7 for important information about the Philips® Plati-
num 5R discharge lamp.
10. XLR DMX Input Jack - This jack is used to receive an incoming
DMX signal or Master/Slave signal.
11. XLR Output Jack - This jack is used to transmit the incoming
DMX signal to another DMX fixture, or transmit a Master/Slave signal
to the next Vizi Spot 5R in the chain. For best results in DMX or Master/
American DJ - www.americandj.com - Vizi Spot 5R Instruction Manual Page 11
®
Controls and Functions Vizi Spot 5R
Slave mode terminate this jack if it is the last unit in the chain. See
"Line Termination" on page 14.
12. Power Cord Inlet - This cord is designed to match the electri-
cal requirements of the unit. Voltage may vary from venue to venue,
when connecting this unit to a power supply be sure to connect to a
matching power outlet. Never use this fixture if the ground prong has
been removed or broken off. The ground prong is designed to reduce
the risk of fire or electrical shock in the event the unit suffers from an
internal short.
13. Fuse Holder - This housing stores a 5 amp (3 amp 220v) protec-
tive fuse. Never defeat the fuse, the fuse is designed to protect the
electronics in the event of severe power fluctuations. Always be sure
to replace the fuse with an exact match as the one being replaced,
unless otherwise told to do so by an authorized American DJ
technician.
American DJ - www.americandj.com - Vizi Spot 5R Instruction Manual Page 12
®
Controls and Functions
service
®