American DJ Vizi Spot 5R User Instructions page 11

Vizi Spot 5R
button and test the different channels.
4. Press MODE/ESC to exit.
PLAY MAIN MENU -
RUN
Run the unit in an Auto mode as a "master" in a
Master/Slave configuration, or as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice by pressing ENTER, "PASS" will flash
in the display and fixture will begin its function.
AUDI
Run the unit in Sound Active mode as a "master", or
as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "AUDI" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice by pressing ENTER, "PASS" will flash
in the display and fixture will begin its function.
AUTO
This is a precaution mode in case you lose the DMX
signal. The fixtue has 4 modes to choose from, please see
page 17 for a description of the 4 modes -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
American DJ - www.americandj.com - Vizi Spot 5R Instruction Manual Page 21
®
System Menu Vizi Spot 5R
3. Tap the UP button until "AUTO" is displayed, press ENTER.
4. Now you can choose between "CLOSE", "HOLD" "AUTO", or
"AUDI". "HOLD" is the default setting.
5. Select the mode that you want the fixture to run in case of a
lost DMX signal and press ENTER.
LAMP MAIN MENU -
OPEN
via the control board.
1. Access the main menu.
2. Tap the UP button until "LAMP" is displayed, press ENTER.
3. The display will show "ON/OFF". Press the UP button to
select "ON" to switch on the lamp, or "OFF" to switch off the
lamp.
4. Press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.
RESE MAIN MENU -
ALL
1. Access the main menu.
2. Tap the UP button until "RESE" is displayed, press ENTER.
3. Tap the UP button until "ALL" is displayed, press ENTER.
4. Press ENTER to reset.
5. Press MODE/ESC to return to the main menu.
SCAN
1. Access the main menu.
With this function you can switch the lamp on or off
With this function you can reset all the motors.
With this function you can reset the pan/tilt motors.
American DJ - www.americandj.com - Vizi Spot 5R Instruction Manual Page 22
®
System Menu