Activating The Memory Seat Feature; Deactivating The Memory Seat Feature; Replacing The Battery - Ford 2002 Explorer Owner's Manual

Controls and features

Activating the memory seat feature

To activate this feature:
1. Position the seat to the position you desire.
2. Press the SET control on the
driver's door panel.
3. Within 5 five seconds, press one SET
control on the remote transmitter
and then press the 1 or 2 control on
the driver's door panel to which you
would like to associate with the seat
1 2
and Driver 1 or Driver 2 positions.
4. Repeat this procedure for another
remote transmitter if desired.

Deactivating the memory seat feature

To deactivate this feature:
1. Press the SET control on the driver's door panel.
2. Within 5 five seconds, press any control on the remote transmitter
which you would like to deactivate and then press the SET control on
the driver's door panel.
3. Repeat this procedure for another remote transmitter if desired.

Replacing the battery

The remote transmitter is powered by one coin type three-volt lithium
battery CR2032 or equivalent. Typical operating range will allow you to
be up to 10 meters (33 feet) away from your vehicle. A decrease in
operating range can be caused by the following factors:
• Weather conditions
• Nearby radio towers
• Structures around the vehicle
• Other vehicles parked next to the vehicle
119