Table of Contents
Advertisement
2 Industrial Small Form
Factor Pluggables (iSFPs)
OmniSwitch Series switches use both copper-based and fiber-based optical Industrial Small Form Factor
Pluggable (SFP) transceivers. SFPs are fully hot-swappable and are available for both short-reach and
long-reach applications. Additionally, Industrial SFPs are designed to operate at an increased temperature
range of -40 ºC to 85 ºC. Copper-based and fiber-based optical SFPs can be mixed on the same module.
In This Chapter
This chapter describes the technical specifications for all the OmniSwitch supported iSFP transceivers. For
additional details about OmniSwitch modules, see the appropriate OmniSwitch Hardware Guide.
iSFP specifications in this chapter include:
•
Industrial Gigabit Ethernet Transceivers. See
•
Industrial Bi-directional Ethernet Transceivers. See
on page
2-22.
•
Industrial 100-FX Ethernet Transceivers. See
page
2-23.
•
Industrial 10-Gigabit Ethernet Transceivers. See
page 2-27
For information on installing and managing OmniSwitch hardware, see the appropriate OmniSwitch Hard-
ware Guide.
For information on OmniSwitch SFP compatibility, see
OmniSwitch Transceivers Guide
"Industrial Gigabit Ethernet Transceivers" on page
"Bi-directional Ethernet Transceivers (cont.)" on
"Industrial 10-Gigabit SFP+ Transceivers" on
April 2011
"Industrial Bi-directional Ethernet Transceivers"
"SFP Compatibility Matrix" on page
2-19.
4-34.
page 2-18
Hide quick links:
Advertisement
Table of Contents
