Defaults
Examples
Related Commands
config trapflags rrm-profile
To enable or disable sending RRM profile related traps, use the config trapflags rrm-profile command.
>config trapflags rrm-profile [enable/disable]
Syntax
Defaults
Examples
Related Commands
config trapflags stpmode
To enable or disable sending spanning tree traps, use the config trapflags stpmode command.
>config trapflags stpmode [enable/disable]
Syntax
Defaults
Examples
Related Commands
CONFIG WATCHLIST COMMANDS
Use the following config watchlist commands.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support voice
or data clients or watchlists.
•
config watchlist add
•
config watchlist delete
•
config watchlist enable/disable
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 151
trapflags
rrm-params
[enable/disable]
Enabled
>config trapflags rrm-params disable
show trapflags
config trapflags rrm-profile
config
trapflags
rrm-profile
[enable/disable]
Enabled
>config trapflags rrm-profile disable
show trapflags
config trapflags stpmode
config
trapflags
stpmode
[enable/disable]
Enabled
>config trapflags stpmode disable
show trapflags
config watchlist
Trap parameters.
RRM parameters traps flag.
Modify the state of the parameter.
Configure parameters.
Trap parameters.
RRM profile traps flag.
Modify the state of the parameter.
Configure parameters.
Trap parameters.
Spanning traps flag.
Modify the state of the parameter.
config trapflags rrm-profile