Download Print this page

Foodsaver Accessories - FoodSaver V1085 Quick Start Manual

Foodsaver foodsaver appliance quick start

Advertisement

QS.1085_v2.1
5/26/04

FoodSaver Accessories

FoodSaver Accessory Guidelines
Always leave at least one inch of space between
1.
contents and rim.
Wipe rim of canister, container or bottle to ensure
2.
it is clean and dry.
Place lid on canister or container, or place stopper
3.
in bottle.
How to Vacuum Package with FoodSaver Accessories
Insert Accessory Hose
Prepare container according to FoodSaver
1.
Accessory Guidelines above.
Insert one end of Accessory Hose
2.
Accessory Port
(D)
end into port on accessory. Twist gray tab while
inserting to ensure a tight fit.
Turn Seal Control Switch
3.
To begin vacuum process, press down firmly on lid
4.
until motor starts, wait 3-5 seconds, then release.
Motor will continue to run.
How to Open FoodSaver Accessories after Vacuum Packaging
FoodSaver Vacuum Packaging Canisters
(without large knob on lid)
To release vacuum and open, push gray rubber
button on lid.
FoodSaver Bulk Canisters and Quick Marinators
(with large knob on lid) and Universal Lids
To release vacuum and open, turn knob on lid
to
.
Open
11:32 AM
Page 3
Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.
Set Seal Control Switch
into
(F)
on appliance. Insert other
to
.
(E)
1
For accessories with a large knob on lid, turn knob
4.
to
. Vacuum package using instructions
Vacuum
below. When vacuum process is complete, turn
knob to
before removing Accessory Hose.
Closed
For accessories without a large knob on lid,
5.
vacuum package using instructions below.
Press and Release Lid
When motor turns off, vacuum process is complete.
5.
Gently twist and remove Accessory Hose from
6.
accessory and appliance.
To test vacuum, simply tug on accessory lid. It should
7.
not move.
For important tips on using accessories
Note:
with different foods, please refer to the FoodSaver
Reference Guide.
FoodSaver Jar Sealer with Mason Jars
For use with Ball
®
and Kerr
®
Do NOT use screw bands when
IMPORTANT:
vacuum packaging jars. To open, wedge spoon
between Mason jar lid and highest part of threaded
rim. Twist spoon gently to release vacuum.
FoodSaver Bottle Stoppers
To release vacuum and open, simply twist and pull
up on Bottle Stopper.
brand Mason jars.

Hide quick links:

Advertisement

loading