Olympus µ-1070 Instruction Manual page 39

Make the settings for the functions while referring to "Using the Menu" (p. 3).
Adjusting the brightness of the monitor
[s]
E
SETUP  s
To adjust the monitor brightness
1 Use CE to adjust the brightness while
viewing the screen, and then press the x
button.
s
BACK
Setting the date and time [X]
E SETUP  X
"Setting the date and time" (p. 13)
To select the date and time display
order
1 Press D after setting Minute, and use
CE to select the date display order.
X
Y
2009
Date order
CANCEL
SET
OK
MENU
M D TIME
Y M D
08 26 12 30
MENU
Setting the date and time for another
time zone [DUALTIME]
E
SETUP  DUALTIME
When [DUALTIME] is set to [ON], the date
and time set here are used in image file
names, dated prints and other data.
Submenu 2 Submenu 3
OFF
—
(Proceeds to
ON the setting
screen .)
*1
The setting procedure is identical to that in "Setting
*1
the date and time" (p. 13).
The date display order is the same as that
set with [X].
Application
Switches to the date and
time set in [X].
The date and
time settings from
[DUALTIME] are used in
file names, dated prints
and other data.
EN