Table of Contents
Advertisement
1 Quick Reference
The Agilent N6705 DC Power Analyzer – At a Glance
Source Features
Color-coded display and
output controls
Programmable voltage
and current
Low output noise
Fast up/down
programming
Fast transient response
Output autoranging
capability
Output On/Off sequencing A turn-on/turn-off delay capability for each output allows output on/off
Front panel binding posts + and – output and + and – sense terminals are provided for each output.
Output protection
Emergency shut-off
Multiple-Quadrant
operation
12
The Agilent N6705 DC Power Analyzer is a multi-functional power
system that combines the functions of a multiple-output DC voltage
source with the waveform/data capturing capability of an
oscilloscope and data logger.
As a multiple-output DC source, the Agilent N6705 provides up to
four configurable outputs. Available power modules have power
levels of 20 W through 500 W, have various voltage and current
combinations, and provide a variety of performance features as
described under "Power Module Capabilities". Each output also has
arbitrary (Arb) waveform generation capability, which lets you
program predefined voltage and current waveforms – or define your
own waveforms. Agilent N678xA Source/Measure Units (SMU) have a
multiple-quadrant power mesh with separate voltage and current
priority source modes.
As a measurement system, the Agilent N6705 displays the average
output voltage and current in Meter View. Waveforms are displayed
in Scope View, which you can adjust using vertical and horizontal
controls. The Data Logger View measures and charts average and
peak voltage and current measurements over an extended period.
Correspondence between color-coded information on the display and front
panel connectors and keys.
Full programming capability is provided for the entire range of output
voltage and current for all power modules.
Available on Agilent N676xA and N675xA power modules. Output noise is
<4.5 mV peak-to-peak, which is comparable to linear supplies.
Available on Agilent N675xA, N676xA, and N678xA SMU power modules.
≤1.5 millisecond response time from 10% to 90% of the output rating.
Available on Agilent N675xA, N676xA, and N678xA SMU power modules.
Transient response is less than 100 μs.
Available on Agilent N676xA and N675xA power modules.
Autoranging supplies the maximum rated power over a continuous range of
voltage and current settings.
sequencing.
Sense terminals provide 4-wire voltage measurements.
Outputs have over-voltage, over-current, and over-temperature protection.
An emergency stop button to quickly shut down all outputs.
Available on Agilent N678xA SMU and N6783A power modules.
2- and 4-quadrant operation provides source and sink output capability.
Model N6705 User's Guide
Advertisement
Table of Contents
