HP ESA-L1500A User's And Calibration Manual page 287

Performance Verification Tests
20. Tracking Generator Feedthrough Options IDN and IDQ
Table 9-22 TG Feedthrough Worksheet
16.In
frequencies greater than 1 MHz and less than or equal to 500 MHz.
Record this amplitude as TR Entry 2 of the performance verification
test record.
17.In
frequencies greater than 500 MHz and less than or equal to
1200 MHz. Record this amplitude as TR Entry 3 of the performance
verification test record.
18.In
frequencies greater than 1200 MHz. Record this amplitude as TR
Entry 4 of the performance verification test record.
286
Tracking
Generator
Output
Frequency
a
400 kHz
1 MHz
20 MHz
50 MHz
100 MHz
250 MHz
400 MHz
500 MHz
700 MHz
850 MHz
1000 MHz
1200 MHz
1300 MHz
1450 MHz
1500 MHz
a. This frequency does not apply to
analyzers with 75
generators
Table 9-22, locate the most positive Noise Level Amplitude for
Table 9-22, locate the most positive Noise Level Amplitude for
Table 9-22, locate the most positive Noise Level Amplitude for
Noise Level
Amplitude
(dBm or dBmV)
tracking
Chapter 9