Connecting The Camera To A Printer; Setting The Print Mode Menu - AgfaPhoto OPTIMA 103 User Manual

AgfaPhoto OPTIMA 103

Connecting the Camera to a Printer

You can print your images directly using a PictBridge compatible printer.
1. Turn on your Printer. Check that the printer is
turned on, there is paper in the printer, and there
are no printer error messages.
2. Connect one end of the USB cable to the printer
while the other end to USB terminal on the
camera.
3. The USB mode menu appears on the screen.
Select Printer by using the
press the SET button.
4. Enter the print mode and print the selected
images.
For details on the following page "Setting the Print
Mode Menu".

Setting the Print Mode Menu

Print Mode menu appears on the screen after the connection between a printer and your camera is
established.
Print Mode includes three major settings:
• Print Select. An image can then be selected to print.
• Print All. Prints all images.
• Print Index. Prints all images as thumbnails.
To set Print Select
1. Use the or
for printing.
2. Specify the number of copies. Use the
to increase/decrease number.
3. Press the FUNC button to toggle between turning on/
off the date stamp.
4. Press the SET button to enter printer settings.
To set Print All and Print Index
Repeat the same steps 2 to 4, then enter printer settings.
or key and
keys to scroll and select an image
or
58
key