Recording Videos - AgfaPhoto OPTIMA 103 User Manual

Table of Contents

Advertisement

AgfaPhoto OPTIMA 103
Setting the Date Stamp
The date of recording can be printed directly on the still
images. This function must be activated before the image
is captured. Once date and time are stamped on an image,
they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
• Available for still images only.
• May slow down AEB/ Burst mode when Date Stamp is
enabled in AEB/ Burst mode.
In vertical or rotated images, the date and time on
your images still appear horizontally.
To set Date Stamp
1. From the Record menu, select Date Stamp.
2. Use the
or
3. Press the SET button to save and apply changes.
Setting Auto Review
The Auto Review function lets you view the captured
image right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
1. From the Record menu, select Auto Review.
2. Use the
or
3. Press the SET button to save and apply changes.

Recording Videos

You can record videos with the camera, the available
recording time depends on the capacity of the memory
card. Videos can be recorded until the maximum memory
capacity has been reached. However the length of a
single video may be limited (the limitation depends on the
camera model).
1. Slide the Mode switch to Movie mode.
2. Focus your camera on the subject that you want to
take.
3. Press the Shutter button to start recording.
4. Use the Zoom dial to zoom in and zoom out an
image.
5. To pause recording, press the key
6. To continue recording, press the key
7. To stop recording, press the Shutter button.
• When the camera stop recording due to reaching maximum capacity (4GB) for a
single video, simply press the Shutter button again to continue recording.
• The camera will automatically stop recording when the memory capacity is full.
• Digital zoom is not available while recording a video.
• Sound cannot be recorded while using zooms (Spinning the Zoom dial.)
Power save is not available in video recording or pause recording.
keys to go through the selection.
keys to go through the selection.
.
again.
38

Advertisement

Table of Contents
loading

Table of Contents