Telephone; Profile Settings; Sim Access Profile - Nokia 9500 User Manual

Communicator
Hide thumbs Also See for 9500:
Table of Contents

Advertisement

C o n t r o l p a n e l
To delete messages from the device, select
mail you want to delete. For example, you can delete all e-mail, or only e-mails that are more than two weeks old. Press
now
to delete the messages.
See "Avoiding low memory," p. 27.

Telephone

Go to
Desk
Tools
Control panel
>
>
Speed dials
See "Speed dialing," p. 22.
Voice call diverting
Voice call barring
See "Call barring," p. 24.
Voice mailboxes
See "Voice mailbox settings," p. 25.
Other settings
See "Call, network, and phone line settings," p. 24.

Profile settings

You can adjust and customize the device tones for different events, environments, or caller groups.
To modify a profile, select
New. Define the settings on the different pages of the
profiles.
Define the following:
Name
— You can rename a profile, and give it any name you want. The
Ringing type
— If you select Ascending, the ringing volume starts from level one and increases level by level to the set volume
level.
Ringing tone
— Press
another folder, press
Browse
lines in use, you can specify a ringing tone for each line.
Personal tones
— Select
Clock alarm
— Select an alarm tone that is used with the alarm clock. Similarly, you can specify an alarm tone for calendar
alarms and received text, multimedia, and fax messages.
Keyboard tone
— Set the volume level of the communicator keyboard.
Telephone keypad tone
Notification tones
— Set the tones made by the device when, for example, the battery is running out of power.
Play ringing tone for
— You can set the phone to ring only upon calls from phone numbers that belong to a selected contact
group. Phone calls coming from outside that group will have a silent alert.

SIM access profile

With the SIM access profile, you can access the SIM card of your communicator from a compatible car kit phone. This way, you
do not need a separate SIM card to access SIM card data and connect to the GSM network.
To use the SIM access profile, you need:
• a compatible car kit phone that supports Bluetooth
• a valid SIM card in your communicator
See "Bluetooth," p. 85.
For more information on car kit phones and compatibility with your communicator, see www.nokia.com. See also the user guide
of your car kit phone.
Using the SIM access profile
1. Activate Bluetooth in your communicator. Go to
Settings
page, scroll to
2. Scroll to
Remote SIM
access, and select Enabled.
3. Activate Bluetooth in the car kit phone.
4. Use your car kit phone to start a search for compatible devices. For instructions, see the user guide of your car kit phone.
5. Select your communicator from the list of compatible devices.
6. Enter the Bluetooth passcode shown on the display of the car kit phone to your communicator to pair the devices.
7. Authorize the car kit phone. Go to
page. Select the car kit phone, and press Edit. In the
communicator and the car kit phone can be made without separate acceptance or authorization. If you select No, connection
requests from this device must be accepted separately every time.
Copyright © 2004-2005 Nokia. All rights reserved.
Data management
> Telephone.
See "Diverting calls," p. 23.
Telephone
Profile
settings. Select a profile in the list, and press Edit. To create a new profile, press
>
Change
to select a ringing tone from the list. If the sound file is located on the memory card or in
to search for the file. To listen to the selected tone, press Play. If you have two alternate phone
On
if you want to use the personal ringing tones of callers that you have set in Contacts.
— Set the volume level of the phone keypad.
Bluetooth
active, and select Yes.
Desk
Tools
>
Messaging
tools. Select
>
Profile settings
dialog. Note that not all settings can be changed for all
General
Desk
Tools
Control panel
>
>
Control panel
Connections
>
>
Device authorised
field, select Yes. Connections between your
65
Delete e-mails
locally, and select the e-
and
Offline
profiles cannot be renamed.
Connections
> Bluetooth. Select the
>
> Bluetooth, and select the
Delete
Paired devices

Advertisement

Table of Contents
loading

Table of Contents