Getting Started; Installing The Sim Card And The Battery; Charging The Battery - Nokia 8850 User Manual

2. Getting started

Installing the SIM card and
the battery
Keep all miniature SIM cards out of the reach
of small children.
The SIM card and its contacts can easily be
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
Before installing the SIM card, always make
sure that the phone is switched off and then
remove the battery.
1. With the
back of the
phone
facing you,
press the
back cover
release
button.
Slide the back cover off.
2. Remove
the battery
by lifting it
from the
finger grip.
3. Insert your
SIM card.
Make sure
that the
golden
connectors
are facing
downward
s and that the bevelled corner is on the right.
NOTE: If you need to remove the SIM card,
carefully slide it out of the SIM card slot.
4. Replace the
battery.
5. Slide the back
cover into its
place.

Charging the battery

1. Attach the lead
from the charger
carefully to the
socket (1.) on the
bottom of your
phone.
NOTE: Connector (2.) is the headset
connector. Do not plug your headset in the
charger connector. It may damage the
charger connector.
2. Connect the charger to an AC wall
outlet. The battery indicator bar
starts to scroll.
The text
Charging
displayed if the phone is switched
on. You can use the phone while
charging.
NOTE: If the battery is totally flat, it may
take a few minutes before the charging
indication appears on the display or any calls
can be made. The charging time depends on
the charger and battery used. For example,
charging a BLB-2 battery with the ACP-8
charger takes about 1 hours 40 minutes.
3. The battery is fully charged when the battery
indicator bar stops scrolling. If the phone is
on, the text
Battery full
displayed.
17
is briefly
is also briefly