Table of Contents
Advertisement
Security
(represented by the
IP Security manager
The IP security manager displays stored policies and only one
policy can be activated at a time. There are two types of
passwords needed:
•
IP security
password: Is to be set when installing the very
first policy, i.e. this password is only set once, but it is
possible to change it later at any time by tapping
button.
•
Import
password: Is needed when installing a policy and
the supplier of the policy gives this.
WIM PIN settings
WIM is used for performing security functions, especially to
store and process information needed for user identification
and authentication. I.e. it's a tamper-resistant store for private
keys, certificates and other objects that may require a PIN for
access or modification.
You can select a PIN from the
list changes content dynamically, displaying only the keys that
are protected by the selected PIN and also have an associated
certificate. Other keys that are protected by the selected PIN
but don't have an associated certificate are not shown in the
WIM object list.
tab)
Password
PIN
choice list. The WIM objects
U s i n g t h e A p p l i c a t i o n P r o g r a m s
You can change status of a PIN:
•
Enable PIN:
A PIN code that is enabled is requested for
authorization of an operation. To proceed with the
operation you must enter the PIN code.
•
Disable
PIN: A PIN code that is disabled is not requested to
authoress an operation to proceed.
You can change the PIN code:
• Select the PIN you want to change and tap
code.
• If a PIN code has been blocked, you must unblock it before
it can be used again. Select the PIN you want to change
and tap
Change PIN
code.
Tip: For information on how to unblock the PIN, please
consult your network service provider.
Password
Sets the password of your device. Choose to never use the
password or to be asked to enter the password whenever the
device is powered on. You can edit the owner information as
well.
Change PIN
51
Advertisement
Table of Contents
