Table of Contents
Advertisement
G e t t i n g Y o u r D e v i c e C o n n e c t e d a n d S y n c h r o n i z e d
17. Enter the user name and password in the dialog that follows
and then click Next.
Note: Consult your network service provider for the
user name and password if required.
18. Click Finish, and then click
Connection
dialog that follows.
19. Click Configure, uncheck
then click OK.
20. Click
OK
to return to the
Now you can click
Dial
modem to connect to the Internet.
Setting up GPRS Modem via USB Connection
1. Install the PC Suite for the Nokia 6708.
Note: For more information about how to install and
configure PC Suite for the Nokia 6708, please refer to
the users guide on the CD.
• The steps below describe the setup procedure in Windows
XP.
2. Make sure that your device is switched on and the
connection mode has been set to
on page 45).
3. Connect the USB connector on the device to a USB port on
the PC using the supplied data cable.
96
Properties
in the
Connect Dial-up
Enable hardware flow control
Connect Dial-up Connection
to start using the device as a GPRS
Modem
(See "USB cable"
4. On your PC, click the
right-click on
5. Click the
Hardware
6. Double-click Modems, and then
(WDM).
7. In the dialog that appears, click the
and
8. Refer to the service provider's setting to enter a command in
the
Extra initialization commands
example of the command is
dialog.
Note: APN (Access Point Node) is a setting by your
network service provider that tells how your data
requests should be routed. Consult your network
service provider for the actual APN address.
9. Click the
Start
to, and then
click the
Start
Panel, and select
10. Click
Create a new
11. In the
New Connection Wizard
12. Click
Connect to the Internet
13. Click
Set up my connection manually
14. Click
Connect using a dial-up modem
Start
button on Windows Taskbar,
My Computer
and select Properties.
tab and then click
Device
Nokia 6708 VSC Modem
Advanced
box, and then click OK. An
+cgdcont=1,"ip", "APN"
button on Windows Taskbar, select
Show all
connections. Alternatively, you can
button on Windows Taskbar, go to
Network
Connections.
connection.
dialog, click Next.
and then Next.
and then Next.
and then Next.
Manager.
tab.
Connect
Control
Advertisement
Table of Contents
