Connectivity (Menu 12); Infrared - Nokia 6610 User Manual

Save to save the time. Key in a
name for the measured time and
press OK. If no name is keyed in,
the total time is used as a title.
Reset to reset the time without
saving it.
Lap times
Press Menu, and select Extras,
Stopwatch and Lap
Start to start the time observation
and Lap to take a lap time. Press
Stop to stop the lap timing. Press
Options and you can save or reset
the lap times. Refer to
observation and time splitting"
above.
Viewing and deleting times
Press Menu, and select Extras, and
Stopwatch.
If the stopwatch is not reset, you can
select Show last to view the latest
measured time. Select
and a list of names or final times of
the time sets is shown, select the
time set you want to view.
To delete the saved times, select
Delete times. Select
press OK, or select
to the times you want to delete,
press Delete and press OK.
timing. Press
"Time
View times
All at once and
One by one, scroll
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
■ Connectivity
(Menu 12)

Infrared

You can set up the phone to receive
data through its infrared (IR) port. To
use an IR connection, the device
with which you want to establish a
connection must be IrDA compliant.
You can send or receive data such as
business cards and calendar notes to
or from a compatible phone or data
device (for example, a computer) via
the IR port of your phone.
Do not point the IR (infrared) beam
at anyone's eye or allow it to
interfere with other IR devices. This
device is a Class 1 Laser product.
Note: Your phone must be
switched on to use this
function. Do not switch the
phone on when wireless
phone use is prohibited or
when it may cause
interference or danger.
Sending and receiving data via IR
• Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions
between the devices. The
preferable distance between the
two devices in an infrared
connection is one meter at most.
55