Profiles (Menu 3) - Nokia 6610 User Manual

M e n u f u n c t i o n s
Select Call cost limit
cost of your calls to a certain
amount of charging units or units
of currency. The PIN2 code is
needed for the call cost settings.
Note: When no more
charging units or
currency units are left,
calls may only be
possible to the
emergency number
programmed into your
phone (e.g. 112, 911 or
other official emergency
number).
• GPRS data counter
check the amounts of sent and
received data in last session, data
sent and received in total, and to
clear the counters. The counters
unit is a byte. To clear the
counters, the security code is
needed.
• GPRS connection timer
check the duration of the last
GPRS connection or the total
GPRS connection. You can also
clear the timers. To clear the
timers, the security code is
needed.
36
to limit the
and scroll to
scroll to
Copyright © 2004 Nokia. All rights reserved.
■ Profiles
(Menu 3)
Your phone has
various setting groups, profiles, for
which you can customise the phone
tones for different events and
environments. At first, personalise
the profiles to your liking and then
you only need to activate a profile to
use it. Available profiles are General,
Silent, Meeting, Outdoor, and Pager.
Press Menu, and select Profiles.
Scroll to a profile and press Select.
• To activate the selected profile,
select Activate.
• To set the profile to be active for
a certain amount of time up to 24
hours, select Timed
end time. When the time set for
the profile expires, the previous
profile that was not timed,
becomes active.
• To personalise the profile, select
Personalise. Select the setting
you want to change and make
the changes.
The settings can also be changed
in the Tone settings
"Tone settings"
To rename a profile, select
name and enter the new name.
Tip: To change the profile
quickly in standby mode,
press the power key
to the profile you want to
activate and press Select.
and set the
menu, see
on page 42.
Profile
, scroll