Connectivity (Menu 12) - Nokia 6800 User Manual

Hide thumbs Also See for 6800:
Table of Contents

Advertisement

LAP TIMING
Press Menu, then select Extras, Stopwatch, and Lap timing. Press Start to start
timing and Lap to record a lap time. Press Stop to stop the lap timing. Press Options
and you can save the lap times, reset the lap times, or start timing again. Refer to
"Timing and Split timing".
VIEWING AND DELETING TIMES
Press Menu, then select Extras and Stopwatch.
If the stopwatch is not reset, you can select Show last time to view the most
recent measured time. Select View times and a list of names or final times of the
time sets is shown. Select the time set you want to view.
To delete the saved times, select Delete times. Select Delete all and press OK, or
select One by one, scroll to the times you want to delete, press Delete and press OK.

• CONNECTIVITY (MENU 12)

Infrared
You can set up the phone to receive data through its infrared (IR) port. To use an
IR connection, the device with which you want to establish a connection must be
IrDA compliant. You can send or receive data such as business cards and calendar
notes to or from a compatible phone or data device (for example, a computer) using
the IR port of your phone.
Do not point the IR beam at anyone's eye or allow it to interfere with other IR
devices. This device is a Class 1 laser product.
Note: Your phone must be switched on to use this function. Do not switch
the phone on when wireless phone use is prohibited or when it may cause
interference or danger.
SENDING AND RECEIVING DATA VIA IR
Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices. The preferable
distance between the two devices in an IR connection is no more than 2 ft.
7in. (about 80cm).
To activate the IR port of your phone to receive data using IR, press Menu and
select Connectivity and Infrared.
The user of the sending phone selects the desired IR function to start data transfer.
If data transfer is not started within two minutes after the activation of the IR port,
the connection is cancelled and has to be started again.
88
Copyright © Nokia 2003

Advertisement

Table of Contents
loading

Table of Contents