Synchronization; Device Manager - Nokia N71 User Manual

To end a connection, select
close all open connections, select
all.
To view the details of a connection, select
Details. The details shown depend on the connection type.

Synchronization

Press , and select
to synchronize your notes, calendar, contacts, or e-mail
with various compatible calendar and address book
applications on a compatible computer or on the Internet.
You can also create or edit synchronization settings.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
You may receive synchronization settings in a special text
message. See "Data and
Synchronize data
In the Sync main view, you can see the different
synchronization profiles.
78 Copyright © 2006 Nokia. All rights reserved.
Options > Disconnect. To
Options > Disconnect
Options
Connect. > Sync. Sync enables you
settings", on page 33.
1 Select a synchronization profile and
Synchronise. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
>
Cancel.
You are notified when the synchronization is complete.
2 To view the log file showing the synchronization status
and how many entries have been added, updated,
deleted, or discarded (not synchronized) in your device
or on the server, select Yes.

Device manager

Press , and select
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These configuration
settings may include access point settings for data
connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select
Start configuration.
To allow or deny receiving of configuration settings from
service providers, select
Disable config..
Options
Connect. > Dev. mgr.. You may
Options
Options > Enable config.
>
>
or