Nokia N71 User Manual page 47

Deny report sending
your device sending delivery reports of received
multimedia messages.
Message validity
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
E-mail
Press , and select
E-mail and from the following:
Mailboxes — Select a mailbox to change
settings, User settings,
Automatic retrieval.
Mailbox in use — Select which mailbox you want to use
for sending e-mail.
To create a new mailbox, select
in the mailbox main view.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail
User name — Enter your user name, given to you by your
service provider.
38 Copyright © 2006 Nokia. All rights reserved.
— Select whether you want to deny
— Select how long the message center
Messag. > Options > Settings
Connection
Retrieval settings, and
Options > New mailbox
and from the following:
Password — Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail serv.
of the mail server that receives your e-mail.
Access point in use
(IAP). See "Connection", on page 82.
Mailbox name — Enter a name for the mailbox.
Mailbox type — Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
>
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports) — Select the security option used to
secure the connection to the remote mailbox.
Port — Define a port for the connection.
APOP secure login
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
— Enter the IP address or host name
— Select an Internet access point
(for POP3 only) — Use with the POP3