Camera Settings - Nokia N71 User Manual

Take time-lapse pictures
Select Options >
to take several pictures in a sequence automatically. You
can set the rate between two frames per second (fast) and
one frame every 15 minutes (slow). The number of
pictures is limited by the amount of memory available.
The pictures are automatically saved in Gallery.
You can also use the
sequence mode with the
timer. See "You in the
picture — self-timer", on
page 12.
After taking the pictures,
they are shown in a grid on
the main display. To view a
picture, press
To return to the sequence
mode viewfinder, select
Back.
You in the picture —
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the
self-timer delay, select
seconds, 20 seconds
12 Copyright © 2006 Nokia. All rights reserved.
Advanced sequence to set the camera
Self
to open it.
self-timer
Options > Self timer
or 30 seconds. To activate the
self-timer, select Activate. The self-timer indicator (
blinks and the device beeps when the timer is running. The
camera takes the picture after the selected delay has
elapsed. You can also use the
mode. See "Take time-lapse

Camera settings

To change the main camera settings, select
Settings, and from the following:
Image quality
(1024x768 resolution) or
better the image quality, the more memory the image uses.
Add to album
image to a certain album in Gallery. If you select Yes, a list
of available albums opens.
Extended zoom
maximum zoom but are prepared to accept a reduction in
image resolution, which may be lower than you have
selected with the
limit the zoom range and have less reduction in resolution,
select Off.
Show captured img.
image after it is taken, or
immediately.
> 10
Default image name
Self timerin the sequence
pictures", on page 12.
— Print (1600x1200 resolution),
MMS (640x480 resolution). The
— Select whether you want to save the
— Select On if you want to achieve
Image quality setting. If you want to
— Select On to see the captured
Off to continue taking pictures
— Select Date or Text.
)
Options >
E-mail