Certificates - Nokia 6101 User Manual

W e b
Change module PIN
module PIN, if allowed by the
security module. Enter the current
module PIN code, then enter the new
code twice.
Change signing PIN
signing PIN code for the digital
signature. Select the signing PIN you
want to change. Enter the current
PIN code, then enter the new code
twice.
See also "Access codes"

Certificates

Important: Note that even if
the use of certificates makes
the risks involved in remote
connections and software
installation considerably
smaller, they must be used
correctly in order to benefit
from increased security. The
existence of a certificate
does not offer any protection
by itself; the certificate
manager must contain
correct, authentic, or trusted
certificates for increased
security to be available.
Certificates have a restricted
lifetime. If Expired
certificate or Certificate not
valid yet is shown even if the
certificate should be valid,
check that the current date
72
— to change the
— to change the
on page x.
Copyright © 2005 Nokia. All rights reserved.
and time in your device are
correct.
Before changing any certificate
settings, you must make sure that
you really trust the owner of the
certificate and that the certificate
really belongs to the listed owner.
There are three kinds of certificates:
server certificates, authority
certificates, and user certificates.
You may receive these certificates
from your service provider. Authority
certificates and user certificates may
also be saved in the security module
by the service provider.
To view the list of the authority or
user certificates downloaded into
your phone, select
Settings > Security settings
Authority certificates
certificates.
The security indicator
displayed during a connection, if the
data transmission between the
phone and the content server is
encrypted.
The security icon does not indicate
that the data transmission between
the gateway and the content server
(or place where the requested
resource is stored) is secure. The
service provider secures the data
transmission between the gateway
and the content server.
Menu > Web >
>
or User
is