Connectivity; Infrared - Nokia 6101 User Manual

Confirm SIM service actions
"SIM services" on page
Help text activation
whether the phone shows help texts
Start-up tone — to select whether
the phone plays a start-up tone
when the phone is switched on

■ Connectivity

You can connect your phone to
compatible devices using an infrared
connection. You can also define the
settings for packet data dial-up
connections.

Infrared

You can set up the phone to send
and receive data through its infrared
(IR) port. To use an IR connection,
the device with which you want to
establish a connection must be IrDA
compliant. You can send or receive
data to or from a compatible phone
or data device (for example, a
computer) through the IR port of
your phone.
Do not point the IR (infrared) beam
at anyone's eyes or allow it to
interfere with other IR devices.
Infrared devices are Class 1 laser
products.
— see
74.
— to select
Copyright © 2005 Nokia. All rights reserved.
When sending or receiving data,
ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
To activate the IR port of your phone
to receive data using IR, select
Menu > Settings
Infrared.
To deactivate the IR connection,
select Menu > Settings
Connectivity > Infrared. When the
phone displays Deactivate
select Yes.
If data transfer is not started within
2 minutes after the activation of the
IR port, the connection is cancelled
and must be started again.
IR connection indicator
When is shown continuously,
the IR connection is activated, and
your phone is ready to send or
receive data through its IR port.
When blinks, your phone is
trying to connect to the other
device, or a connection has been
lost.
S e t t i n g s
> Connectivity >
>
infrared?,
41