Adding A Ringing Tone; Voice Dialling - Nokia 3230 User Manual

• To copy a phone, fax, or pager
number from Contacts to your
SIM card, scroll to the contact
card you want to copy and select
→
Options Copy to SIM direct.

Adding a ringing tone

You can set a ringing tone for each
contact card and group. When that
contact or group member calls you,
the phone plays the chosen ringing
tone (if the caller's telephone
number is sent with the call and your
phone recognises it).
1. Press the joystick to open a
contact card or go to the Groups
list and select a contact group.
2. Select Options
A list of ringing tones opens.
3. Use the joystick to select the
ringing tone you wish to use for
the contact or group and press
Select.
• To remove the ringing tone,
select Default tone
of ringing tones.

Voice dialling

→ Contacts.
Select Menu
You can make a phone call by saying
a voice tag that has been added to a
contact card. Any spoken word(s)
can be a voice tag.
→
Ringing tone.
from the list
Copyright © 2005 Nokia. All rights reserved.
P e r s o n a l i n f o r m a t i o n
Before using voice tags, note that:
• Voice tags are not
language-dependent. They are
dependent on the speaker's voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags and use them in a quiet
environment.
• Very short names are not
accepted. Use long names and
avoid similar names for different
numbers.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should
not rely solely upon voice
dialling in all circumstances.
Adding a voice tag to a phone
number
Voice tags can only be added to
phone numbers stored in the phone's
memory. See "Managing contacts"
on page 24.
1. In the Contacts
to the contact that you want to
add a voice tag to, and press the
joystick to open the contact card.
2. Scroll to the number that you
want to add the voice tag to, and
select Options
main view, scroll
→
Add voice tag.
25