Drop And Insert Application; Figure 3-6. Drop And Insert Application Diagram; Table 3-2. Drop And Insert Application - Required Equipment - ADTRAN MX3216 System Manual

MX3216 System Manual

Drop and Insert Application

In the drop and insert application (see
DSX-1 ports. Then, DS1s from the other DSX-1 ports can be inserted into the corresponding
DS1s in the other DS3. Any DS1s not dropped continue on from one DS3 to the other. This
application allows a DS3 to be used to transport DS1s between several sites.
Central Site
DS3
µ Wave/
Leased
DS3
28 DS1s
from
Central Site
Table 3-2 shows the equipment needed for a drop and insert application.

Table 3-2. Drop and Insert Application - Required Equipment

Part #
1189001L1
1189007L1
1189008L1
3-6
Figure
Remote Site #1
MX3216
DS3
AIS
Drop DS1s Insert DS1s
to Local to Remote
Equipment Location

Figure 3-6. Drop and Insert Application Diagram

Equipment
MX3 Chassis
MX3 Fan Module
MX3216 Controller Card
3-6), DS1s from one DS3 can be dropped out the
Remote Site #2
DS3
µ Wave/
DS3 DS3
Leased
DS3
Original DS1s
and inserted
DS1s continue
downstream;
Drop DS1s
AIS in
unmapped DS1s
Equipment
Quantity
1
1
1 (2 for redundancy)
MX3216
DS3
AIS
Original DS1s
and inserted
DS1s continue
downstream;
Insert DS1s
to Local to Remote
unmapped DS1s
Location
61189008L1-1B
AIS in