Mx3216 Controller Card Aco Button; Table 1-3. Standby Mx3216 Controller Card Led Status - ADTRAN MX3216 System Manual

MX3216 System Manual
Table 1-2. Active MX3216 Controller Card LED Status (Continued)
Label Status
Off
DSX-1 STAT
Green
Red
4 Red (Flashing)
4 Red (Flashing once per event)
Off
DSX-1 TEST
4 Red (Flashing once per event)
Amber
Amber (Flashing)
4

Table 1-3. Standby MX3216 Controller Card LED Status

Label Status
Green
ACT
Amber
4
Amber (Flashing)
4 Red (Flashing)
Off
ALM
Off
DS3 A/B
Off
DSX-1 STAT
Off
DSX-1 TEST

MX3216 Controller Card ACO Button

The alarm cut off (ACO) button disables any audible alarms. Any active visual alarms remain
active. Press the
ACO
1-4
button on the front panel to disable any audible alarms.
Description
All DSX-1 drops are disabled
Enabled DSX-1 drops normal (All OK)
Non-critical alarm (AIS) on an enabled DSX-1
drop
LOS on an enabled drop
Single/Burst RX DSX-1 code violations during
previous second
No DSX-1 tests in progress
Single/Burst pattern errors on drop in test
In test (locally originated)
In test (remotely originated)
Description
Normal (All OK)
Software update in progress
Not ready or software mismatch
Card failure
Permanent state during standby
Permanent state during standby
Permanent state during standby
Permanent state during standby
61189008L1-1B