Table of Contents
Advertisement
Cancel
or to pressing
data value is restored and the cursor returns to the submenu
field.
61200410L1-1
To Set the Data Field
Data fields that are available for editing are preceded by a
colon
.
(:)
Step
Action
1
Press
Enter
item number. The cursor moves to the data field, to the
right of the submenu item name.
You can use the
value settings which display in the data field position, one
at a time.
2
When the desired value is in the data field position,
press
Enter
The unit is set for the value shown in the data field and the
cursor moves back to the submenu item position indicating
the operation is complete. You can select another submenu
field or press
is available any time during the operation. If used pri-
after making a data change, the original
Enter
To View Display-Only Data Fields
An example of a D
selecting the following menu choices:
Step
Action
1
Select
STATUS
Select submenu CURR ERR/ALM .
2
LOSS OF SIGNAL INACTIVE/ACTIVE
ing the current state of the alarm.
To Exit Any Menu Field Operation or Display
Press
as many times as required to return to the
Cancel
desired menu level.
while the cursor is located on the submenu
and
Up
Down Arrows
to set the value.
to return to the submenu.
Cancel
O
data field is found by
ISPLAY
NLY
from the
MAIN MENU
ESU LT User Manual
Chapter 3. Operation
to scan the available
.
is displayed, giv-
3-7
Advertisement
Table of Contents
