Changing The Smart Portrait Settings - Nikon COOLPIX L23 User Manual

Changing the Smart Portrait Settings

After displaying the F (smart portrait) mode shooting screen (A 43), press the
d button (A 10) to set the following options in the smart portrait menu.
• Use the multi selector to choose and apply settings (A 9).
• To exit the shooting menu, press the d button.
Image mode
Choose the image mode (combination of image size and compression rate) at
which images are saved (A 49).
Changes made to the image mode setting apply to all shooting modes (except
movie mode).
Skin softening
• On (default setting): When the shutter is released, the camera detects a human
face (up to three faces) and softens skin tones through image enhancement
before saving images.
• Off: The skin softening function is set to Off.
• Skin softening settings can be confirmed by the icon displayed on the shooting
screen (A 6). When Off is selected, no icon is displayed. The degree of skin
softening effect cannot be confirmed on the subject on the shooting screen.
View the image to confirm it after shooting.
Blink proof
When On is selected, the camera releases the shutter twice every time an image is
captured and saves only one image in which the subject's eyes are open compared
to the other.
• If an image in which the subject's eyes may have
closed is saved, the message on the right is
displayed for a few seconds.
• If On is selected, the flash is disabled.
• The default setting is Off.
• Blink proof settings can be confirmed in the
monitor when shooting (A 6). When Off is
selected, no icon is displayed.
Capturing Smiling Faces Automatically (Smart Portrait Mode)
A blink was detected in the
picture just taken.
45