Page 3
Introduction Parts of the Camera Preparing for Shooting Using the Camera Shooting Features Using the Menus Connecting the Camera to a TV, Computer, or Printer Reference Section Technical Notes and Index...
Introduction Read This First Thank you for purchasing the Nikon COOLPIX L29 digital camera. Before using the camera, please read the information in “For Your Safety” (A viii-xi) and familiarize yourself with the information provided in this manual. After reading, please keep this manual handy and refer...
Attaching the Camera Strap About This Manual If you want to start using the camera right away, see “Preparing for Shooting” (A 6) and “Using the Camera” (A 12). To learn about the parts of the camera and information that is displayed in the monitor, see “Parts of the Camera”...
Page 6
Other Information Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used in this manual: Icon Description This icon indicates cautions and information that should be read before using the camera. This icon indicates notes and information that should be read before using the camera.
Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Page 8
Nikon will not be held liable for any damages resulting from the use of this product. While every effort was made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately).
Page 9
Disposing of Data Storage Devices Please note that deleting images or formatting data storage devices such as memory cards or built-in camera memory does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data.
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
Page 11
The EN-MH2 rechargeable batteries sunlight are for use with Nikon digital cameras only, and are compatible Failure to observe this precaution with COOLPIX L29. could cause damage or fire.
Page 12
Should the insulation the batteries when no charge be damaged and the wires become remains. exposed, take it to a Nikon- Discontinue use immediately should authorized service representative for you notice any change in the inspection. Failure to observe these...
Page 13
Should the monitor break, care should and output jacks, use only the cables be taken to avoid injury caused by provided or sold by Nikon for the broken glass and to prevent liquid purpose, to maintain compliance with crystal from the monitor touching the product regulations.
Nikon determined by turning the equipment Corporation may void the user’s off and on, the user is encouraged to try authority to operate the equipment.
Page 15
Interface Cables Notice for Customers in Europe Use the interface cables sold or This symbol indicates that provided by Nikon for your equipment. electrical and electronic Using other interface cables may equipment is to be collected exceed the limits of Class B Part 15 of separately.
Page 16
This symbol on the batteries indicates that the batteries are to be collected separately. The following apply only to users in European countries: All batteries, whether marked with this symbol or not, are designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Table of Contents Introduction ........... ii Using the Camera ........12 Read This First ............ii Shooting with Easy Auto Mode ....12 Attaching the Camera Strap......iii Using the Zoom ............14 About This Manual ..........iii The Shutter-release Button ......14 Information and Precautions......
Page 18
Editing Still Images........E25 Reference Section ......... E1 Before Editing Images ........ E25 G (Easy Auto) Mode ........E3 I D-Lighting: Scene Mode Enhancing Brightness and Contrast... E26 (Shooting Suited to Scenes)..... E4 e Skin Softening: Tips and Notes ........... E5 Softening Skin Tones........
Page 19
The Setup Menu ......... E61 The Shooting Menu (for A (Auto) Mode)......... E44 Welcome Screen..........E61 Time Zone and Date........E62 Image Mode Settings (Image Size and Quality)......E44 Monitor Settings ..........E64 White Balance (Adjusting Hue) .... E46 Print Date Continuous Shooting .........
Page 20
Technical Notes and Index....F1 Caring for the Product ......... F2 The Camera............F2 Batteries..............F4 Memory Cards............F6 Cleaning and Storage........F7 Cleaning..............F7 Storage ..............F7 Troubleshooting ..........F8 Specifications ..........F15 Approved Memory Cards......F19 Index..............F21 xviii...
Parts of the Camera The Camera Body 1 2 3 4 Lens cover closed Flash ............19, E11 Shutter-release button........13 Zoom control............14 Lens cover f : wide-angle..........14 Microphone........... E39 g : telephoto..........14 h : thumbnail playback...16, E24 Lens i : playback zoom......16, E23 Power connector cover (for connection...
Page 22
11 10 l (delete) button..........17 Flash lamp............E13 b (e movie-record) button..22, E39 Battery-chamber/ memory card slot cover........6 A (shooting mode) button .......20, E3, E4, E8, E10 USB/audio/video output connector..26 c (playback) button........16 Connector cover..........26 Multi selector............24 Tripod socket ..........F17 k (apply selection) button ......
The Monitor The information that is displayed changes depending on the camera’s settings and state of use. By default, information is displayed when the camera is first turned on and when you operate the camera, and turns off after a few seconds (when Photo info is set to Auto info in Monitor settings (A 24, E64) in the setup menu).
Preparing for Shooting Insert the Batteries and Memory Card Open the battery-chamber/memory card slot cover. Hold the camera upside down to prevent the batteries from falling out. Insert the batteries and memory card. Confirm that the positive (+) and negative (–) battery terminals are oriented correctly and insert the batteries.
Notes About the Batteries Do not combine old and new batteries or batteries of different makes or types. Batteries with the following defects cannot be used: Batteries with peeling Batteries with insulation that Batteries with a flat does not cover the area around negative terminal the negative terminal Formatting Memory Cards...
Turn the Camera On and Set the Display Language, Date, and Time When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed. If you exit without setting the date and time, O will flash when the shooting screen is displayed.
Page 29
Use JK to select your home time zone and press the k button. L o n d o n C a s a b l a n c a Press H to turn on daylight saving time (W is displayed above the map). Press I to turn it off.
Page 30
Use HI to select Easy auto mode and press Easy auto mode the k button. Battery level indicator The camera enters the shooting mode and Shooting you can take images in Easy auto mode. mode icon While shooting, you can check the battery level indicator and the number of exposures remaining.
The Auto Off Function If you do not operate the camera for about 30 seconds, the monitor turns off, the camera enters standby mode, and the power-on lamp flashes. The camera turns off after about three minutes in standby mode. The amount of time until the camera enters standby mode can be changed using the Auto off setting (A 24, E68) in the setup menu.
Using the Camera Shooting with Easy Auto Mode Hold the camera steady. Keep fingers and other objects away from the lens, flash, microphone, and speaker. When taking pictures in the “tall” (portrait) orientation, make sure the flash is above the lens. Frame the picture.
Press the shutter-release button halfway (A 14). When the subject is in focus, the focus area glows green. Multiple focus areas can glow green. When you are using digital zoom, the camera focuses on the subject in the center of the frame and the focus area is not displayed.
Using the Zoom When you move the zoom control, the zoom lens position Zoom out Zoom in changes. To zoom in closer to the subject: Move toward g (telephoto) To zoom out and view a larger area: Move toward f (wide-angle) When you turn the camera on, the zoom moves to the maximum wide-angle position.
Page 35
Notes About Easy Auto Mode Depending upon shooting conditions, the camera may not select the desired scene mode. In this case, select another shooting mode (E4, E8, E10). When the digital zoom is in effect, the scene mode changes to U. Notes About Saving Images and Recording Movies The indicator showing the number of exposures remaining or the indicator showing the maximum movie length flashes while images are being saved or while a movie is being recorded.
Play Back Images Press the c (playback) button to enter playback mode. If you press and hold down the c (playback) button while the camera is turned off, the camera turns on in playback mode. Use the multi selector HIJK to select an 1 5 / 0 5 / 2 0 1 4 1 5 : 3 0 1 5 / 0 5 / 2 0 1 4 1 5 : 3 0 image to display.
Delete Images Press the l (delete) button to delete the image currently displayed in the monitor. Use the multi selector HI to select Current image and press the k button. Delete Current image: The image currently displayed is deleted. Erase selected images: Multiple images that you select are deleted (A 18).
Page 38
Operating the Erase Selected Images Screen Use the multi selector JK to select an image Erase selec ted images to be deleted, and then use H to display a check mark. To undo the selection, press I to remove the check mark. Move the zoom control (A 1) toward g (i) to switch to full-frame playback or f (h) to switch to thumbnail ON/OFF...
Using the Flash and Self-timer You can use the multi selector to set frequently used functions such as the flash and self- timer. You can set the following functions using HIJK in the shooting screen. Flash mode Self-timer Exposure compensation Macro mode X Flash mode (E11) You can select the flash mode to match the shooting conditions.
Shooting Features Changing the Shooting Mode The following shooting modes are available. G Easy auto mode (E3) The camera automatically selects the optimum scene mode when you frame an image, making it even easier to take images using settings that suit the scene. b Scene mode (E4) Camera settings are optimized according to the scene that you select.
Page 41
Use the multi selector HI to select a Easy auto mode shooting mode and press the k button.
Recording and Playing Back Movies Display the shooting screen. Check the remaining amount of movie recording time. 1 5 m 0 s 1 5 m 0 s 1 9 0 0 1 9 0 0 Movie recording time remaining Press the b (e movie-record) button to start movie recording.
Page 43
Select a movie in full-frame playback mode 1 5 / 0 5 / 2 0 1 4 1 5 : 3 0 1 5 / 0 5 / 2 0 1 4 1 5 : 3 0 and press the k button. 0 0 1 0 .
Using the Menus Use the multi selector and k button to navigate the menus. The following menus are available. A Shooting menu (E43) Available by pressing the d button in the shooting screen. Allows you to change image size and quality, continuous shooting settings, etc. c Playback menu (E52) Available by pressing the d button when viewing images in full-frame playback mode or thumbnail playback mode.
Page 45
Use HI to select the desired Press the k button. tab. The menu options become selectable. The menu is changed. Set up Set up Welcome screen Welcome screen Time zone and date Time zone and date Monitor settings Monitor settings Print date Print date Motion detec tion...
Connecting the Camera to a TV, Computer, or Printer Connection Methods You can enhance your enjoyment of images and movies by connecting the camera to a TV, computer, or printer. USB/audio/video output connector Open the Insert the plug straight. connector cover. Before connecting the camera to an external device, make sure the remaining battery level is sufficient and turn the camera off.
Page 47
Viewing images on a TV Images and movies captured with the camera can be viewed on a TV. Connection method: Connect the video and audio plugs of the Audio Video Cable EG-CP14 to the TV’s input jacks. A 28 Viewing and organizing images on a computer You can transfer images to a computer to perform simple retouching and manage image data.
Install ViewNX 2 to upload, view, edit, and share photos and movies. Installing ViewNX 2 An Internet connection is required. For system requirements and other information, see the Nikon website for your region. Download the ViewNX 2 installer. Start the computer and download the installer from: http://nikonimglib.com/nvnx/...
Transferring Images to the Computer Choose how images will be copied to the computer. Choose one of the following methods: SD card slot: If your computer is equipped with an SD card slot, the card can be inserted directly in the slot. SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card.
Nikon Transfer 2 and click OK. 2 Double-click Import File. If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts. Connecting the USB Cable The connection may not be recognized if the camera is connected to the computer via a USB hub.
Terminate the connection. If you are using a card reader or card slot, choose the appropriate option in the computer operating system to eject the removable disk corresponding to the memory card, and then remove the card from the card reader or card slot. If the camera is connected to the computer, turn the camera off and disconnect the USB cable.
Reference Section The Reference Section provides detailed information and hints about using the camera. Shooting G (Easy Auto) Mode ..................E3 Scene Mode (Shooting Suited to Scenes) ..........E4 Smart Portrait Mode (Capturing Images of Smiling Faces).... E8 A (Auto) Mode....................E10 Functions That Can Be Set Using the Multi Selector ......
Movies Recording Movies..................E39 Playing Back Movies ................... E41 Menu Options Available in the Shooting Menus ......... E43 The Shooting Menu (for A (Auto) Mode).......... E44 The Smart Portrait Menu................E50 The Playback Menu..................E52 The Movie Menu ..................E59 The Setup Menu...................E61 Additional Information Error Messages .....................
G (Easy Auto) Mode The camera automatically selects the optimum scene mode when you frame an image, making it even easier to take images using settings that suit the scene. Enter shooting mode M A (shooting mode) button M G (easy auto) mode M k button When the camera selects a scene mode, the shooting mode icon displayed in the shooting screen changes to that for the scene mode currently enabled.
Scene Mode (Shooting Suited to Scenes) When a scene is selected, camera settings are automatically optimized for the selected scene. Enter shooting mode M A (shooting mode) button M b (second icon from the top*) M K M HIJK M select a scene M k button * The icon of the last scene selected is displayed.
Tips and Notes d Sports While the shutter-release button is held all the way down, the camera shoots up to about 3 images continuously at a rate of about 1.2 fps (when Image mode is set to P 4608×3456). The frame rate for continuous shooting may vary depending upon the current image mode setting, the memory card used, or shooting condition.
l Museum The camera captures a series of up to ten images while the shutter-release button is held all the way down, and the sharpest image in the series is automatically selected and saved (BSS (Best Shot Selector)). The flash does not fire. m Fireworks show The shutter speed is fixed at about four seconds.
O Pet portrait When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it. By default, the shutter is automatically released when the camera detects a dog or cat face (pet portrait auto release).
Smart Portrait Mode (Capturing Images of Smiling Faces) When the camera detects a smiling face, you can take an image automatically without pressing the shutter-release button (smile timer (E50)). You can use the skin softening option to smooth the skin tones of human faces. Enter shooting mode M A (shooting mode) button M F Smart portrait mode M k button Frame the picture.
Page 61
Functions Available in Smart Portrait Mode Flash mode (E11) Self-timer (E14) Exposure compensation (E16) Smart portrait menu (E43)
A (Auto) Mode Used for general shooting. Settings can be adjusted to suit the shooting conditions and the type of shot you want to capture. Enter shooting mode M A (shooting mode) button M A (auto) mode M k button The camera focuses on the area in the center of the frame.
Functions That Can Be Set Using the Multi Selector The functions that are available vary with the shooting mode (E17). Using the Flash When using A (auto) mode and other shooting modes, you can select the flash mode to match the shooting conditions. Press the multi selector H (m).
Available Flash Modes Auto The flash fires when necessary, such as in dim lighting. The flash mode icon on the shooting screen is displayed only immediately after the setting is made. Auto with red-eye reduction Reduce red-eye in portraits caused by the flash (E13). The flash does not fire.
The Flash Lamp The status of the flash can be confirmed by pressing the shutter- release button halfway. On: The flash fires when you press the shutter-release button all the way down. Flashing: The flash is charging. The camera cannot shoot images. Off: The flash does not fire when an image is taken.
Using the Self-timer The camera is equipped with a self-timer that releases the shutter about ten seconds after you press the shutter-release button. Press the multi selector J (n). Select ON and press the k button. If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled.
Using Macro Mode Use macro mode when taking close-up images. Press the multi selector I (p). Select ON and press the k button. If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled. Macro mode Move the zoom control to set the zoom ratio to a position where F and the zoom indicator...
Adjusting Brightness (Exposure Compensation) You can adjust overall image brightness. Press the multi selector K (o). Select a compensation value and press the k button. To brighten the image, set a positive (+) value. +0.3 To darken the image, set a negative (–) value. The compensation value is applied, even without pressing the k button.
Default Settings Default settings for each shooting mode are described below. Exposure Flash Self-timer Macro compensation (E11) (E14) (E15) (E16) G (easy auto) Scene b (portrait) c (landscape) d (sports) e (night portrait) f (party/indoor) Z (beach) z (snow) h (sunset) i (dusk/dawn) j (night landscape) k (close-up)
Page 70
The camera automatically selects the flash mode appropriate for the scene it has selected. W (off) can be selected manually. The setting cannot be changed. Automatically changes to macro mode when the camera selects Close-up. The setting cannot be changed. The setting cannot be changed.
Functions That Cannot Be Used Simultaneously Some functions cannot be used with other menu options. Restricted function Option Description When a setting other than Single is selected, the Continuous (E48) flash cannot be used. Flash mode When Blink proof is set to On, the flash cannot be Blink proof (E51) used.
Focusing The focus area varies depending on the shooting mode. Using Face Detection In the following shooting modes, the camera uses face detection to automatically focus on human faces. Portrait or Night portrait in G (easy auto) mode (E3) Portrait or Night portrait in scene mode (E4) Smart portrait mode (E8) 1 5 m 0 s 1 5 m 0 s...
Using Skin Softening When the shutter is released while using one of the shooting modes listed below, the camera detects human faces and processes the image to soften facial skin tones (up to three faces). Smart portrait mode (E8) Portrait or Night portrait in G (easy auto) mode (E3) Portrait or Night portrait in scene mode (E4) Notes About Skin Softening It may take more time than usual to save images after shooting.
Focus Lock Focus lock shooting is recommended when the camera does not activate the focus area that contains the desired subject. Select A (auto) mode (E10). Position the subject in the center of the frame and press the shutter- release button halfway. Confirm that the focus area glows green.
Editing Still Images Before Editing Images You can easily edit images on this camera. Edited copies are saved as separate files. Edited copies are saved with the same shooting date and time as the original. Restrictions on Image Editing When an edited copy is further modified with another editing function, check the following restrictions.
I D-Lighting: Enhancing Brightness and Contrast Press the c button (playback mode) M select an image M d button M I D-Lighting M k button Use the multi selector HI to select OK and press D -Lighting the k button. The edited version is displayed on the right.
e Skin Softening: Softening Skin Tones Press the c button (playback mode) M select an image M d button M e Skin softening M k button Use the multi selector HI to select the Sk in softening amount of effect applied and press the k button.
p Filter Effects: Applying Digital Filter Effects Press the c button (playback mode) M select an image M d button M p Filter effects M k button Type Description Allows you to soften the image by adding a slight blur around the center of Soft the image.
Page 81
Adjust the effect and press the k button. Soft When using Soft: Use HI to select the range of the effect. When using Selective color: Use HI to select the color to be retained. Press J to return to the Filter effects selection screen Normal without making any changes.
g Small Picture: Reducing the Size of an Image Press the c button (playback mode) M select an image M d button M g Small picture M k button Use the multi selector HI to select the Small pic ture desired copy size and press the k button.
a Crop: Creating a Cropped Copy Move the zoom control to enlarge the image (E23). Refine copy composition and press the d button. Move the zoom control toward g (i) or f (h) to adjust the zoom ratio. Set a zoom ratio at which u is displayed.
Connecting the Camera to a TV (Viewing Images on a TV) Connect the camera to a TV using an audio/video cable (E78) to play back images or movies on the TV. Turn off the camera and connect it to the TV. Make sure that the plugs are properly oriented.
Connecting the Camera to a Printer (Direct Print) Users of PictBridge-compatible printers can connect the camera directly to the printer and print images without using a computer. Connecting the Camera to a Printer Turn off the camera. Turn on the printer. Check printer settings.
Turn on the camera. The PictBridge startup screen (1) is displayed in the camera monitor, followed by the Print selection screen (2). Print selec tion 1 5 / 0 5 2 0 1 4 N O . 3 2 Printing Individual Images Connect the camera to a printer (E33).
Page 87
Select the desired number of copies (up to Copies nine) and press the k button. Select Paper size and press the k button. PictBridge 0 0 4 prints Star t print Copies Paper size Select the desired paper size and press the k button. To apply the paper size setting configured on the printer, select Default as the paper size option.
Printing Multiple Images Connect the camera to a printer (E33). When the Print selection screen is displayed, Print selec tion press the d button. 1 5 / 0 5 2 0 1 4 N O . 3 2 Use the multi selector HI to select Paper Print menu size and press the k button.
Page 89
Print selection Select images (up to 99) and the number of copies (up to Print selec tion nine) of each. Use the multi selector JK to select images, and use HI to specify the number of copies to be printed. Images selected for printing are indicated by a check mark and the numeral indicating the number of copies to be printed.
DPOF printing Print images for which a print order was created using the DPOF printing Print order option (E52). When the screen shown on the right is displayed, select 0 1 0 prints Start print and press the k button to start printing. To view the current print order, select View images and press the k button.
Recording Movies When no memory card is inserted (i.e., when using the camera’s internal memory), Movie options (E59) is set to m VGA (640×480). n HD 720p (1280×720) cannot be selected. Display the shooting screen. Check the remaining amount of movie recording time. If Photo info in the Monitor settings (E64) in the setup menu is set to Movie frame+auto info, the area that will be visible in the movie can be confirmed before movie...
Maximum Movie Length Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even when there is sufficient free space on the memory card for longer recording. The maximum movie length for a single movie is displayed on the shooting screen. Recording may end before either limit is reached if camera temperature becomes elevated.
Camera Temperature The camera may become warm when shooting movies for an extended period of time or when the camera is used in a hot area. If the inside of the camera becomes extremely hot when recording movies, the camera will automatically stop recording.
Page 94
Functions Available During Playback Paused Playback controls are displayed in the monitor. The operations listed below can be performed by using the multi selector JK to select a control and then pressing the k button. Function Icon Description Hold down the k button to rewind the movie. Rewind Hold down the k button to advance the movie.
Options Available in the Shooting Menus The settings listed below can be changed by pressing the d button during shooting. Shooting menu Image mode White balance Continuous Color options 1 5 m 0 s 1 5 m 0 s 1 9 0 0 1 9 0 0 The settings that can be changed vary depending on the shooting mode, as shown below.
The Shooting Menu (for A (Auto) Mode) Image Mode Settings (Image Size and Quality) Enter shooting mode M d button M Shooting menu M Image mode M k button Select the combination of image size and compression ratio that is used when saving images. The higher the image mode setting, the larger the size at which images can be printed, and the lower the compression ratio, the higher the quality of the images, but the number of images that can be saved is reduced.
Page 97
Notes About Image Mode The image mode setting can also be changed in shooting modes other than A (auto) mode. The changed setting is also applied to other shooting modes. The setting may not be changed when using certain settings of other functions. Number of Images That Can Be Saved The approximate number of images that can be saved can be checked in the monitor when shooting (A 10).
White Balance (Adjusting Hue) Select A (auto) mode M d button M White balance M k button Adjust white balance to suit the light source or weather conditions in order to make the colors in images match what you see with your eyes. Use Auto under most conditions.
Page 99
Using Preset Manual Use the procedure below to measure the white balance value under the lighting used during shooting. Place a white or gray reference object under the lighting that will be used during shooting. Use the multi selector HI to select Preset White balance manual in the White balance menu, and Auto...
Continuous Shooting Select A (auto) mode M d button M Continuous M k button Option Description U Single One image is taken each time the shutter-release button is pressed. (default setting) While the shutter-release button is held all the way down, images are captured continuously.
Notes About Multi-shot 16 Smear (F3) visible in the monitor when shooting with Multi-shot 16 enabled is saved with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when shooting with Multi-shot 16 enabled is recommended. Color Options Select A (auto) mode M d button M Color options M k button Make colors more vivid or save images in monochrome.
The Smart Portrait Menu See “Image Mode Settings (Image Size and Quality)” (E44) for information about Image mode. Skin Softening Enter smart portrait mode M d button M Skin softening M k button Option Description When the shutter is released, the camera detects one or more human e On (default setting) faces (up to three), and processes the image to soften facial skin tones before saving the image.
Blink Proof Enter smart portrait mode M d button M Blink proof M k button Option Description The camera automatically releases the shutter twice with every shot and saves one image in which the subject’s eyes are open. If the camera saved an image in which the subject’s eyes may have y On been closed, A blink was detected in the picture just taken.
The Playback Menu See “Editing Still Images” (E25) for information about image editing functions. a Print Order (Creating a DPOF Print Order) Press the c button (playback mode) M d button M a Print order M k button If you configure print order settings in advance, you can use them with the printing methods listed below.
Select images (up to 99) and the number of Print selec tion copies (up to nine) of each. Use the multi selector JK to select images, and use HI to specify the number of copies to be printed. Images selected for printing are indicated by a check mark and the numeral indicating the number of copies to be Back printed.
b Slide Show Press the c button (playback mode) M d button M b Slide show M k button Play back images one by one in an automated “slide show.” When movie files are played back in the slide show, only the first frame of each movie is displayed. Use the multi selector HI to select Start Slide show and press the k button.
d Protect Press the c button (playback mode) M d button M d Protect M k button The camera protects selected images from accidental deletion. Select images to protect or cancel protection for previously protected images from the image selection screen (E56). Note that formatting the camera’s internal memory or the memory card permanently deletes protected files (E69).
The Image Selection Screen When an image selection screen such as the one shown on Protec t the right is displayed while operating the camera, follow the procedures described below to select the images. ON/OFF Back Use the multi selector JK to select an image. Protec t Move the zoom control (A 1) toward g (i) to switch to full-frame playback or f (h) to switch to thumbnail...
f Rotate Image Press the c button (playback mode) M d button M f Rotate image M k button Specify the orientation in which saved images are displayed during playback. Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise. Select an image from the image selection screen (E56).
h Copy (Copy Between Internal Memory and Memory Card) Press the c button (playback mode) M d button M h Copy M k button Copy images between the internal memory and a memory card. Use the multi selector HI to select a Copy destination option to which images are Camera to card...
The Movie Menu Movie Options Enter shooting mode M d button M D tab M Movie options M k button Select the desired movie option to record. Memory cards (Class 6 or higher) are recommended for recording movies (F19). Aspect ratio Option Image size (horizontal to vertical)
Autofocus Mode Enter shooting mode M d button M D tab M Autofocus mode M k button Set how the camera focuses in movie mode. Option Description Focus is locked when the b (e movie-record) button is pressed to A Single AF start recording.
The Setup Menu Welcome Screen d button M z tab M Welcome screen M k button Configure the welcome screen that is displayed when you turn on the camera. Option Description None Does not display the welcome screen. (default setting) COOLPIX Displays a welcome screen with the COOLPIX logo.
Time Zone and Date d button M z tab M Time zone and date M k button Set the camera clock. Option Description Use JK to select a field and then use Date and time HI to set the date and time. Select the minute field and then press the k button to finish.
Page 115
Select w Home time zone or x Travel Time zone destination and press the k button. London, Casablanca The date and time displayed in the monitor changes depending on whether the home time zone or travel 1 5 / 0 5 / 2 0 1 4 1 5 : 3 0 destination is selected.
Monitor Settings d button M z tab M Monitor settings M k button Option Description Photo info Set whether or not to display information in the monitor. Select from five settings. Brightness Default setting: 3 Photo Info Shooting mode Playback mode 1 5 / 0 5 / 2 0 1 4 1 5 : 3 0 1 5 / 0 5 / 2 0 1 4 1 5 : 3 0 0 0 0 4 .
Page 117
Shooting mode Playback mode The current settings or operation guide is displayed as in Auto info. 1 5 m 0 s 1 5 m 0 s Framing 1 9 0 0 1 9 0 0 grid+auto info In addition to information shown with Auto info, a framing grid is displayed to help frame images.
Print Date (Imprinting Date and Time) d button M z tab M Print date M k button The shooting date and time can be imprinted on the images when shooting, allowing the information to be printed even from printers that do not support date printing (E53). 15.05.2014 15.05.2014 Option...
Motion Detection d button M z tab M Motion detection M k button Enable motion detection to reduce the effects of subject movement and camera shake when shooting still images. Option Description Motion detection is enabled with some shooting modes or settings, when r is displayed on the shooting screen.
Auto Off d button M z tab M Auto off M k button Set the amount of time that elapses before the camera enters standby mode (A 11). Option Description Auto off You can select 30 s (default setting), 1 min, 5 min, or 30 min. If On (default setting) is selected, the camera enters standby mode when there is no change in the brightness of the subject, even before the time selected for Sleep mode...
Format Memory/Format Card d button M z tab M Format memory/Format card M k button Use this option to format the internal memory or a memory card. Formatting the internal memory or memory cards permanently deletes all data. Data that has been deleted cannot be recovered. Make sure to transfer important images to a computer before formatting.
Blink Warning d button M z tab M Blink warning M k button Select whether or not the camera detects human subjects that have blinked using face detection (E20) when shooting in the following modes: G (easy auto) mode Portrait or Night portrait scene mode (E4) Option Description When one or more human subjects may have blinked in an image...
Eye-Fi Upload d button M z tab M Eye-Fi upload M k button Select whether or not the camera’s Eye-Fi card (available from third-party manufacturers) sends images to your computer. Option Description b Enable Upload images created by the camera to a preselected destination. c Disable (default setting) Images are not uploaded.
To ensure that the camera shows the correct battery level (A 10), select the type that matches the batteries currently in use. Option Description Alkaline (default setting) LR6/L40 (AA-size) alkaline batteries COOLPIX (Ni-MH) Nikon EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries Lithium FR6/L91 (AA-size) lithium batteries...
Error Messages Refer to the table below if an error message is displayed. Display Cause/Solution Memory card is write The write-protect switch is in the “lock” position. – protected. Slide the write-protect switch to the “write” position. This card cannot be An error occurred while accessing the memory card.
Page 127
Display Cause/Solution An error occurred while saving the image. Insert a new memory card or format the internal memory or memory card. The camera has run out of file numbers. Insert a new memory card or format the internal memory or Image cannot be saved.
Page 128
Cause/Solution A lens error occurred. Turn the camera off and then on again. If the error persists, Lens error contact your retailer or Nikon-authorized service representative. An error occurred while communicating with the printer. Communications error Turn the camera off and reconnect the USB cable.
File Names Images or movies are assigned file names as follows. D S C N 00 0 1 . J P G Identifier Extension (not shown on camera monitor) (indicates file format) Still images .JPG Original still images DSCN and movies Movies .AVI Small copies...
Optional Accessories Rechargeable Rechargeable Ni-MH batteries EN-MH2-B2 (set of two EN-MH2 batteries) battery Rechargeable Ni-MH batteries EN-MH2-B4 (set of four EN-MH2 batteries) Battery Charger MH-72 (includes two EN-MH2 rechargeable Ni-MH batteries) Battery charger Battery Charger MH-73 (includes four EN-MH2 rechargeable Ni-MH batteries) AC Adapter EH-65A (connect as shown) AC adapter Make sure that the power connector cord has been properly aligned in the...
Technical Notes and Index Caring for the Product..........F2 The Camera......................F2 Batteries ........................F4 Memory Cards .......................F6 Cleaning and Storage..........F7 Cleaning........................F7 Storage ........................F7 Troubleshooting............F8 Specifications............F15 Approved Memory Cards ................F19 Index .................F21...
Caring for the Product The Camera To ensure continued enjoyment of this Nikon product, observe the precautions described below in addition to the warnings in “For Your Safety” (A viii - xi) when using or storing the device. Do Not Drop The product may malfunction if subjected to strong shock or vibration.
Page 133
Images in the monitor may be difficult to see under bright lighting. The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon-authorized service representative. Notes About Smear White or colored streaks may be visible when bright subjects are framed in the monitor. This phenomenon, known as “smear,”...
Batteries Be sure to read and follow the warnings in “For Your Safety” (A viii-xi) before use. Notes About Using Batteries Used batteries may overheat. Handle with caution. Do not use batteries beyond their recommended expiration date. Do not turn the camera on and off repeatedly if discharged batteries are inserted in the camera. Spare Batteries We recommend carrying spare batteries depending on where you are shooting.
Page 135
Notes About Rechargeable Ni-MH Batteries If you repeatedly charge rechargeable Ni-MH batteries while they still have some charge remaining, the message Battery exhausted. may be displayed prematurely when using the batteries. This is due to the “memory effect,” in which the amount of charge the batteries can hold decreases temporarily.
Memory Cards Use only Secure Digital memory cards. See “Approved Memory Cards” (F19) for recommended memory cards. Observe the precautions noted in the documentation included with your memory card. Do not affix labels or stickers to the memory card. Do not format the memory card using a computer. The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera.
Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end).
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Cause/Solution Wait for recording to end. If the problem persists, turn the camera off.
Page 139
Problem Cause/Solution Select Monitor settings > Brightness in the 24, E64 Monitor is hard to read. setup menu and adjust the monitor brightness. The monitor is dirty. Clean the monitor. If the camera clock has not been set, O flashes during shooting and movie recording.
Shooting Issues Problem Cause/Solution Cannot switch to shooting 26, 29, Disconnect the USB cable. mode. When the camera is in playback mode, press the 1, 16 A button. No image captured when When menus are displayed, press the d button. the shutter-release button is The batteries are exhausted.
Page 141
Problem Cause/Solution Bright specks appear in The flash is reflecting off particles in the air. Set the 19, E12 flash mode setting to W (off). images captured with flash. The flash mode is set to W (off). 19, E11, A scene mode that restricts the flash is selected. Flash does not fire.
Page 142
Problem Cause/Solution The flash mode is set to W (off). 19, E11, The flash window is blocked. Images are too dark The subject is beyond the range of the flash. 19, E16 (underexposed). Adjust exposure compensation. The subject is backlit. Select Backlighting scene 19, 20, mode or set the flash mode setting to X (fill flash).
Page 143
The camera is not recognized by the computer. – start when camera is The computer is not set to start Nikon Transfer 2 connected to a computer. automatically. For more information about Nikon Transfer 2, refer to help information contained in...
Page 144
Problem Cause/Solution The memory card contains no images. Replace the Images to be printed are not memory card. displayed. Remove the memory card to print images from the internal memory. The camera cannot be used to select the paper size in the following situations, even when printing from a PictBridge-compatible printer.
Specifications Nikon COOLPIX L29 Digital Camera Type Compact digital camera Number of effective pixels 16.1 million Image sensor -in. type CCD; approx. 16.44 million total pixels Lens NIKKOR lens with 5× optical zoom 4.6–23.0 mm (angle of view equivalent to that of Focal length 26–130 mm lens in 35mm [135] format)
Page 146
Storage Media Internal memory (approx. 20 MB), SD/SDHC/SDXC memory card File system DCF, Exif 2.3, and DPOF compliant Still pictures: JPEG File formats Movies: AVI (Motion-JPEG compliant) 16M (High) [4608 × 3456P] 16M [4608 × 3456] 8M [3264 × 2448] Image size 4M [2272 ×...
Page 147
Interface Hi-Speed USB Data transfer protocol MTP, PTP Video output Can be selected from NTSC and PAL I/O terminal Audio/video (A/V) output; digital I/O (USB) Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hindi, Hungarian, Supported languages Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Spanish,...
Page 148
Individual movie files cannot exceed 4 GB in size or 29 minutes in length. Recording may end before this limit is reached if camera temperature becomes elevated. Specifications Nikon will not be held liable for any errors this manual may contain. The appearance of this product and its specifications are subject to change without notice.
Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies. When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
Page 150
SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC. PictBridge is a trademark. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders.
Index Audio/video-in jack ....... 27, E32 Symbols Auto flash ............E12 g Telephoto............14 Auto mode.......... 20, E10 f Wide-angle............ 14 Auto off........... 11, E68 i Playback zoom ......16, E23 Autofocus........E21, E60 h Thumbnail playback..... 16, E24 Autofocus mode........E60 G Easy auto mode......
Page 152
Color options..........E49 Filter effects ..........E28 Computer............27, 29 Fireworks show m ...... E4, E6 Connector cover........... 2 Firmware version........E73 Continuous shooting......E48 Flash ............. 1, E11 Copy..............E58 Flash lamp ..........2, E13 Crop..........E23, E31 Flash mode..........19, E11 Flash off ............
Page 153
Print order option ........E53 Night landscape j ........E4 Printer............. 27, E33 Night portrait e......E4, E5 Protect............. E55 Nikon Transfer 2 ..........30 Number of exposures remaining Rechargeable battery ......E78 ..............10, E45 Recording movies......22, E39 Red-eye reduction....
Page 154
Scene mode .......... 20, E4 Thumbnail playback...... 16, E24 Self-timer..........19, E14 Time difference ......... E62 Self-timer lamp ........1, E14 Time zone ..........9, E62 Setup menu........24, E61 Time zone and date......8, E62 Shooting..............12 Tripod socket ........... 2, F17 Shooting menu .....
Page 156
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. CT3K01(11) 6MN32811-01...