NEC SuperScript 4200 Network Manual page 57

b. When the Install PostScript Printer from PPD dialog
box is displayed, choose for example NEC
SuperScript 4400 PS and click Next.
c. When the Local Port Selection list is displayed,
choose Available port and click Next.
d. When the Add Printer dialog box is displayed,
choose a Printer Name and click Next.
e. When the NEC SuperScript property box is
displayed, check it and click OK.
f. If there are no more printers to be installed, click
Exit.
9. PrintAgent System Setup
When the Welcome to NEC PrintAgent dialog box is
displayed, click Next. Then, the PrintAgent Setup starts.
When the Add RedipS Enable Printer dialog box is
displayed, enter the URL (IP Address of the printer) and
click Install.
10. When the SuperScript Setup Information dialog box is
displayed, click Continue to proceed to Pull Printing
server or click Exit to exit SuperScript Color Laser Setup.
11. Pull Printing Server Setup
When the Choose Destination Location dialog box is
displayed, check the Destination Folder and click Next.
Then, the Pull Printing server setup starts. When the
Pull Printing 53