Mitsubishi Electric DLP EW330U User Manual page 43

Projector Position
Auto Power Off
4.
SYSTEM SETUP: Blank Timer
Basic
Panel Key Lock
Timer Controller
Splash Screen
Quick Cooling
Audio Settings
Standby Monitor Out
Menu Settings
Lamp Settings
5. Security Settings
SYSTEM SETUP:
Advanced
Closed Caption
LAN Control Settings
Reset All Settings
6. INFORMATION
Current System Status
Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment
connected to the projector or no signal detected, limited menu items are accessible.
Front Table/Rear Table/Rear Ceiling/
Front Ceiling
Disable/5 min/10 min/15 min/20 min/25
min/30 min
Disable/5 min/10 min/15 min/20 min/25
min/30 min
On/Off
Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12
hr
Black/Blue/MITSUBISHI
On/Off
Mute On/Off
Volume
Standby Audio Out On/Off
Off/On
Menu display time 5 sec/10 sec/15 sec/20 sec/25 sec/30 sec
Center/Top-Left/Top-Right/Bottom-Right/
Menu position
Bottom-Left
Lamp mode Standard/Low
Reset lamp timer
Equivalent lamp hour
Change password
Power on lock On/Off
Closed Caption
On/Off
Enable
Caption Version CC1/CC2/CC3/CC4
Control By RS-232C/LAN
PJLink Certification On/Off
Change PJLink Password
DHCP On/Off
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Source
Setting
Resolution
Color System
Equivalent Lamp Hour
EN-43