Electrical Connection - Miele G 690 Operating Instructions Manual

Electrical connection

Electrical connection
Please follow the installation instruc-
tions carefully.
This dishwasher is supplied ready
for connection to an a.c. single
phase supply, (230 - 240 V 50 Hz for
the UK and Australia). It is supplied
with a mains cable and moulded
plug.
All electrical work should be carried
out by a suitably qualified and com-
petent person in accordance with
national and local regulations. Con-
nection should be made via a fused
plug and suitable switched socket
which is easily accessible.
For extra safety it is advisable to in-
stall a residual current device (RCD)
with a trip current of 30 mA.
The voltage, rated load and fuse
rating are given on the data plate.
Please ensure that these match the
household mains supply.
74
Important
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol
coloured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red
(UK), or marked with the letter A for
(AUSTRALIA).
WARNING
THIS APPLIANCE MUST
BE EARTHED
z
or