Interrupting A Programme; Programme Change - Miele G 690 Operating Instructions Manual

Switching on and off

Interrupting a programme

A wash programme is interrupted as
soon as the door is opened.
If the door is closed again the pro-
gramme will continue from the position
it was at when it was interrupted.
Warning!
Water in the dishwasher may be
hot. Danger of scalding. Only
open the door if absolutely necess-
ary and exercise caution when
doing so. Afterwards hold the door
for about 20 secs in the nearly
closed position, before pushing it
firmly shut. This allows the tempera-
ture in the wash cabinet to even out.
38

Programme change

Proceed as follows if the "START/Stop"
button has not yet been pushed in to
start the programme:
Press the Programme selector but-
ton (17) for the required programme.
If required, re-select the additional
options "Delay start" or "Top Solo",
(see Section on Additional options).
Press the "START/Stop" button (22).
The indicator light next to the "START/
Stop" button goes out. The pro-
gramme starts.
Proceed as follows if the programme is
already running or the delay start
period has come to an end:
Press the "START/Stop" button (22)
for at least one second.
The indicator light next to this button
stays lit up during this time.
After this all the indicator lights next to
the programme selection buttons, and
the decimal point in the Time display
light up.
Press the programme selection but-
ton (17) for the programme required.
Re-select additional option "Delay
start" or "Top solo", (see Section on
additional options).
Press the "START/Stop" button (22).
The indicator light next to the "START/
Stop" button goes out. The pro-
gramme starts.