Miele G 674 Operating Instructions Manual page 41

Press the "Start" button (21).
The "Start" indicator light (21) goes out,
and the light ring goes out 10 minutes
later. If one of the buttons on the control
panel is pressed or the programme se-
lector is turned during the delay start
period the light ring will come on again
for 10 minutes.
The delay time counts down in 1 hour
steps until the delay start period has
elapsed for delay start periods of over
10 hours, and in minutes for delay start
periods of under 10 hours.
Once the delay start period has
elapsed the selected programme
begins automatically. The time left for a
programme to run then shows in the
display, the "Delay Start" indicator light
goes out and the "Time left" indicator
light and the light ring come on.
How the delay start time is shown
in the time display:
up to 59 minutes:
example - 30 minutes = 30
between 1 hour and 9 hours 30
minutes:
example - 5 hours = 5.00
10 hours and over:
example - 15 hours = 15h
To avoid the danger of children com-
ing into contact with dishwasher
detergent:
Only fill the detergent dispenser im-
mediately before starting the pro-
gramme, i.e. before pressing
the"Start" button, and activate the
child safety lock.
Operating the dishwasher
When using the "Delay Start" func-
tion, make sure that the compart-
ment is dry before adding deter-
gent. Wipe dry with a cloth if
necessary.
Starting a programme before the
delay start period has elapsed:
A programme can be started before
the delay start period has elapsed. Pro-
ceed as follows:
Turn the programme selector (18) to
"Stop".
Leave the selector in this position for
at least one second.
The "Delay Start" indicator light (19)
goes out.
Turn the programme selector (18) to
the required programme.
Note:
If the "Top Solo" function had been se-
lected, then you will need to select it
again.
Press the "Start" button (21).
The programme starts. The "Start" indi-
cator light (21) goes out and the
"Wash/Rinses" indicator light (16)
comes on.
41