Miele G 663 Operating Instructions Manual page 15

Procedure...
Once the correct water hardness level has been pro-
grammed in:
Switch the dishwasher off by pressing the "Off" (
touch pad.
If you need to programme in a different water hardness
level:
Press the pad, corresponding to the water hardness
level in your area. Whilst this pad is pressed in, the
relevant indicator will light up.
1 - 4 °d (0.2 - 0.7 mmol/l): Touch pad
5 - 6 °d (0.9 - 1.1 mmol/l): Touch pad
7 °d (
8 - 10 °d (1.4 - 1.8 mmol/l): Touch pad
11 - 12 °d (2.0 - 2.2 mmol/l): Touch pad
13 - 70 °d (2.3 -12.6 mmol/l): proceed to next page
Release the touch pad.
Depending on what has been programmed the follow-
ing indicator lights may also come on:
Press touch pad
Press touch pad
Switch the dishwasher off by pressing the "Off" (
touch pad.
The water hardness level is now stored in the pro-
gramme memory.
Check the setting on the water hardness selector in
the wash cabinet, and change if necessary (see "Set-
ting the water hardness level selector in the wash
cabinet").
1.3 mmol/l): Touch pad
g
.
g
again.
Before using for the first time
)
o
b
c
d
e
f
)
o
n n
lit up flashes
b
On + Salt
c
On + Salt
d
On + Salt
e
On + Salt
f
On + Salt
On Salt +
b d e
, ,
g
On + Salt
On Salt +
c
g
15