Cleaning and care
56
Oven interior
The oven interior, back panel and roof liner are coated with
dark pyrolytic enamel which facilitates cleaning.
This is a particularly hard enamel with an extremely smooth
surface.
Because of its anti-stick properties most debris can be easily
removed with warm water and a little washing-up liquid
applied with a soft cloth. This should be done after each use.
Never use hard brushes, hard sponges, wire wool pads,
knives or any other abrasive materials or cleaning agents.
They can damage the enamel.
If using an oven spray, the manufacturer's instructions
must be followed.
Pyrolytic cleaning of the oven interior
Before starting a pyrolytic cleaning process please note the
following advice:
Remove any coarse soiling from the oven before you start.
There is a fibre-glass door seal around the oven cavity.
This seal is particularly sensitive and should not be
cleaned unless absolutely necessary. Rubbing the seal
can damage it.
Remove all accessories as well as the runners and any
extra accessories such as, for example, the baking
carriage, or telescopic runners from the oven interior
before starting the pyrolytic cleaning process. The high
temperatures needed for pyrolysis will damage the
accessories and cause irreparable damage to the baking
carriage and runners.