Cleaning And Care; Appliance Front And Control Panel - Miele H 4540 Pyrolytic Operating Instructions Manual

Appliance front and control
panel
Clean the door handle and the control
elements regularly, preferably after
each use.
This will help prevent grease or other
deposits adhering to surfaces and
becoming difficult to remove.
^ All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is
suitable for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
To prevent the risk of scratches and
damage to the surface structure of
glass, stainless steel and aluminium
fronted appliances pay particular
attention to the following cleaning
instructions.
Glass fronted appliances
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,

Cleaning and care

– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– oven sprays.
Aluminium fronted appliances
Aluminium is affected by the way that
light falls on it, by the surrounding
environment and by the angle you
observe it from.
Aluminium surfaces and controls
may suffer discolouration or damage
if acids, alkalis or soiling are left on
them for too long.
Remove these straight away.
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaners,
– cleaning agents containing
descaling agents,
– diswasher detergent,
– oven sprays.
51